1) foaming ceramics
发泡陶瓷
1.
The result of experiments shows that under the pressure of 75 ～ 150kg/cm2, firing temperature of 1165 ～ 1175℃,short insulation time can produce foaming ceramics as major closed porosity, and uniform microstructure.
以抛光砖废渣和珍珠岩尾矿为基料,探讨成型压力对制备闭孔发泡陶瓷的影响,试验结果表明:为制备闭孔为主,显微结构均匀的发泡陶瓷,成型压力75-150kg/cm2,烧成温度1165℃-1175℃,短保温时间,是比较适宜的。
2) high temperature foamed ceramic
高温发泡陶瓷
1.
The high temperature foamed ceramic with water all proof and thermal insulation has been trial- produced by using local porcelain sand and cullet.
利用地方瓷砂原料和废碎玻璃试制了具有防水、保温功能的高温发泡陶瓷。
2.
The high temperature foamed ceramic with water-proof and thermal insulation was prepared by means of dry pressing and sintering at 1220 ℃ to 1230 ℃ .
以建筑抛光砖原料为基础料,添加少量的矿化剂和氧化镁,经干压成型后于1220℃-1300℃烧成下制备了具有防水、保温功能的闭孔高温发泡陶瓷。
3) foam ceramics
泡沫陶瓷
1.
Hydrodynamic performance and mass transferefficiency of foam ceramics ring packing;
泡沫陶瓷环形填料的流体力学和传质性能
2.
Preparation of moissanite composites foam ceramics filters used in production of soft magnetic alloys;
净化软磁合金用碳化硅质泡沫陶瓷过滤器的研制
3.
The experiments and mechanism of foam ceramics affecting gas explosion process;
泡沫陶瓷对瓦斯爆炸过程影响的实验及机理
4) Foam ceramic
泡沫陶瓷
1.
The Preparation of Foam Ceramic as Immobile Cell Carrier;
细胞固定化载体泡沫陶瓷的制备
2.
The Influence of Sintering Craft on the Compressive Strength of Mullite Crystal Toughening Foam Ceramic
烧成工艺对莫来石增韧泡沫陶瓷强度的影响
3.
The Growth of Mullite Crystal Toughening Foam Ceramic
莫来石晶体增韧泡沫陶瓷中晶体的生长过程
5) ceramic foam
泡沫陶瓷
1.
Effect of Fe_2O_3 on properties of SiC-base ceramic foam filter;
Fe_2O_3对SiC基泡沫陶瓷过滤器性能的影响
2.
Study of the sintered ceramic foam filters for molten steel;
铸钢用泡沫陶瓷过滤器的研制
3.
Effects of the rare-earth abounding with CeO_2 on the mechanical properties, morphology and constitution of phases in the zirconia ceramic foam;
富铈稀土对氧化锆泡沫陶瓷过滤器性能及晶相组织结构的影响
6) ceramic foams
泡沫陶瓷
1.
Deformation behavior of two kinds of ceramic foams made by different methods are investigated by compressive tests.
在压缩条件下研究了两种不同工艺生产(1#自然硬化法和2 #高温烧结法)的泡沫陶瓷压缩破坏行为。
2.
Depending on their nature and structure, ceramic foams have novel and potential applications in industrial fields.
泡沫陶瓷是具有泡沫状结构的一类高孔隙率多孔陶瓷。
3.
Because of the low cost and high efficacy, alumina-mullite ceramic foams has been widely concerned in the industry.
泡沫陶瓷是一种特殊工艺制作的开孔率高达70%～90%并具有三维立体网络骨架结构和贯通气孔的新型多孔陶瓷材料,具有化学性能稳定、强度高、耐高温、抗热震性好、比表面积大等诸多优点。
补充资料：发泡
分子式：
分子量：
CAS号：
性质：使塑料、橡胶等物料产生气泡而制成泡沫产品的过程。通常有机械发泡、物理发泡和化学发泡三种方法。其共同点是：在一定的条件下产生气体；同时，在一定粘度范围内的液态或塑性状态中，使物料具有气体泡孔结构。
分子量：
CAS号：
性质：使塑料、橡胶等物料产生气泡而制成泡沫产品的过程。通常有机械发泡、物理发泡和化学发泡三种方法。其共同点是：在一定的条件下产生气体；同时，在一定粘度范围内的液态或塑性状态中，使物料具有气体泡孔结构。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条