1) arbitrary gradient
任意功能梯度
2) functionally graded
功能梯度
1.
The bending problem of a functionally graded anisotropic cantilever beam subjected to a linearly distributed load is investigated.
对功能梯度各向异性弹性悬臂梁在线性分布载荷作用下的弯曲问题进行了研究·从平面应力问题的基本方程出发,假定应力函数为梁长度方向的多项式形式,由应力函数求导给出应力,利用协调方程和边界条件可完全确定应力函数·将解析解与有限元数值方法的结果进行了对比,两者吻合良好
2.
A new type of actuator using functionally graded piezoelectric ceramics can produce large out of plane displacements, reduce midplane stresses and avoid failure from internal debonding or from stress peaks.
压电功能梯度执行器能产生较大的位移、降低应力峰值并避免了粘结层带来的问题,压电梯度超声换能器能拓展频带宽度。
3) functionally gradient
功能梯度
1.
Nano-composite functionally gradient Ti(C,N)-based cermet indexable inserts have been produced separately by vacuum sintering and surface heat-treatment with hot isostatic pressing(HIP) in nitrogen.
利用真空烧结工艺和表面氮化处理工艺,制备了功能梯度Ti(C,N)基金属陶瓷可转位刀片。
2.
Nano-composite Ti(C,N)-based cermet indexable inserts and functionally gradient Ti(C,N)-based cermet indexable inserts were produced separately by vacuum sintering and surface heat-treatment with hot isostatic pressing (HIP) in nitrogen.
利用真空烧结工艺和表面氮化处理工艺,制备了纳米复合 Ti(C,N)基金属陶瓷可转位刀片和功能梯度 Ti(C,N)基金属陶瓷可转位刀片,详细研究了氮化处理对自制金属陶瓷刀具磨损形态和机理的影响。
4) functional grade
功能梯度
1.
The analytical solutions of natural frequency and mode shape may be applied to 36 boundary conditions and arbitary functional grades.
本文基于斜坐标系,建立起平行四边形功能梯度板的基本微分方程及变分方程,用梁函数组合法对平行四边形及菱形功能梯度板进行动力特性分析,提出了适用于每边任取简支、固定、自由边界之一(包括36种边界)平行四边形功能梯度板固有频率与振型的解析解;在简化情况下,给出了各种边界条件平行四边形功能梯度板各阶固有频率解的统一表达式。
2.
The obtained analytical solutions of natural frequency and mode shape can be applied to 36 boundary conditions and arbitrary functional grades.
采用梁函数组合法对功能梯度复合材料矩形板进行动力特性分析,提出了适用于每边任取简支、固定、自由边界之一(包括36种边界)、材料功能梯度沿厚度任意分布的矩形板固有频率与振型的解析解一般表达式;在简化情况下,给出了各种边界条件功能梯度矩形板固有频率解的直接显式。
5) functionally graded material
功能梯度
1.
The practical physical process of the electrical contact materials were considered more precisely than common those in this design method from the idea of the functionally graded material.
通过粉末冶金法制备了银基AgZnO/AgZnO-CdO/AgCdO叠层材料和AgSnO2梯度触头材料,这种设计方法从功能梯度的角度出发,更准确地考虑到了电接触材料的实际工作情况。
2.
Post-buckling equilibrium paths of functionally graded material(FGM)rectangular bar with one end fixed and another end free are studied.
对一端固定一端自由功能梯度压杆的后屈曲问题进行了分析。
6) functionally gradient
梯度功能
1.
Research on Processing of Functionally Gradient Disc-like Parts of Aluminum Composites by Centrifugal Casting;
离心铸造铝基复合材料梯度功能盘状零件成形工艺研究
2.
Improved model of IPMC's elastic modulus using functionally gradient method
采用梯度功能方法的IPMC弹性模量改进模型
3.
On the first time, the metal oxide anode coating with gradient constitution was prepared on the design of functionally gradient material in this paper.
首次用梯度功能材料设计思想制成了成份呈梯度分布的金属氧化物涂层阳极 (DSA) ,比用传统方法制备的阳极寿命提高了 40多倍 ,并用SEM、EDX对其界面过渡的形貌及成份分布进行了研究。
补充资料：任意
1.任随其意，不受约束。 2.没有任何条件的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条