2) sandwich structure
夹芯结构
1.
For improving the interface's associative intensity of composite sandwich structure,we prepare a new composite sandwich with the compound core of composite pillar and foam plastic.
为了改善复合材料夹芯结构中芯材与面板界面结合强度,研制了一种新型夹芯结构,即复合材料柱/泡沫塑料复合芯材夹芯结构。
2.
type piezoelectric composites using thickness shear mode (PCMTS) were selected as the cores of the sandwich structure, which can generate the thickness shear deformation and actuate the sandwich structure to give rise to the desired transverse deflection.
提出了利用厚度剪切压电效应的压电复合材料（ＰＣＭＴＳ）作为夹芯结构芯材的新型驱动方式，分析了ＰＣＭＴＳ的驱动原理。
3.
Microwave-absorbing composite sandwich structures have been widely used because of its light weight,high strength as well as perfect property of electromagnetic wave absorption.
夹芯结构吸波复合材料因其质轻、强度高,又能较好地吸收电磁波而广泛应用于飞机的机翼、尾翼和机身等部位。
3) sandwich structure
夹层结构
1.
The main component of polyurethane foam and the technique were studied to develop a rigid polyurethane foam(PUF) which could be used in the sandwich structure.
针对夹层结构的特点,通过对聚氨酯泡沫的各主要组分及发泡工艺的研究,研制出了一种适用于夹层结构的硬质聚氨酯泡沫。
2.
With the introduction of composite sandwich structure,the paper presents the properties of the common core materials,including aluminum honeycomb,NOMEX honeycomb and foam.
在分析夹层结构的基础上,概述了常用芯材包括铝蜂窝、NOMEX蜂窝和聚甲基丙烯酰亚胺泡沫塑料的性能和特点,介绍了刚性泡沫夹层结构常用的成型工艺,详细阐述了刚性泡沫夹层结构的模压共固化成型工艺及相关参数的选定。
3.
This paper reviews characteristics of the process and performance of sandwich structures with different cellular solids core and FRP skins.
本文从制造工艺和材料性能等角度评述了FRP高性能夹层结构用芯材的特性,认为不同的多孔固体芯材在高性能夹层结构中是不可替代的,它们之间互为补充。
4) sandwich
[英]['sænwɪtʃ] [美]['sænwɪtʃ]
夹层结构
1.
Shear properties of X-Z-pin reinforced foam core sandwich;
X状Z-pin增强泡沫夹层结构的剪切性能
2.
Progress of Moulding Technology of Resin-matrix Composite/foam Plastic Sandwich;
树脂基复合材料/泡沫塑料夹层结构成型技术研究进展
3.
X-shape Z-pin reinforced sandwich is a novel structural core material.
综合考虑了面板对横向增强Z-pin的不同约束情况,结合空间网架结构和等效夹杂方法,提出了X状Z-pins增强泡沫夹层结构剪切刚度的预报模型,经实际计算后与已有的实验值和有限元模拟值比较,证明该方法具有足够的工程精度。
5) sandwich structure
夹心结构
1.
Optimization of seed layer of PbTiO_3/PbZr_(0.3)Ti_(0.7)O_3/PbTiO_3 sandwich structure ferroelectric thin film;
PbTiO_3/PbZr_(0·3)Ti_(0·7)O_3/PbTiO_3夹心结构铁电薄膜子晶层的优化
2.
47\})O\-3/PbTiO\-3(PT/PZT/PT) sandwich structure is proposed based on Sol Gel method using inorganic zirconium salt as raw material.
发现夹心结构有助于提高 PZT薄膜的品质。
3.
A new PbTiO 3/Pb(Zr,Ti)O 3/PbTiO 3(PT/PZT/PT) sandwich structure is prepared on Pt/Ti/SiO 2/Si substrate using inorganic zirconium salt and Sol Gel method.
47) O3/ Pb Ti O3(PT/ PZT/ PT)夹心结构。
6) sandwich construction
夹层结构
1.
Through the theoretical analysis of the flexural properties of FRP honeycomb sandwich construction, it proves that the values of theory and test agree well.
本文对玻璃钢蜂窝夹层结构板的弯曲试验结果 (四边简支和四边固支 )进行理论分析 ,理论值与试验值符合得很好。
2.
This paper gives all properties of composites and honeycomb core, which can be used for design of compsites products, particularly, for computer design of sandwich construction products with honeycomb core, they are very important for military products.
本文给出复合材料及蜂窝芯的全部力学性能,可以用于复合材料产品设计,特别是适用于蜂窝夹层结构产品的计算机设计,对于军用产品显得更重要。
3.
In order to meet the development needs of high speed ships which use sandwich construction,many light weight construction core materials with high performance have been exploited in these days.
夹层结构是FRP/CM(纤维增强塑料)舰船的一个重要发展方向。
补充资料：夹套
分子式：
CAS号：
性质： 是指在容器壁(或管壁)外面加上的一个外套。夹套内可通入加热介质如蒸气、热水或热油等来加热容器内(或管道内)物料，也可通入冷却介质如冷却水或其他冷却流体来冷却容器内(或管道内)的物料。
CAS号：
性质： 是指在容器壁(或管壁)外面加上的一个外套。夹套内可通入加热介质如蒸气、热水或热油等来加热容器内(或管道内)物料，也可通入冷却介质如冷却水或其他冷却流体来冷却容器内(或管道内)的物料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条