1) melt pouring temperature
熔体浇注温度
3) pouring temperature
浇注温度
1.
Effect of pouring temperatures on the microstructure of the semi-solid AlSi_9Mg alloy;
浇注温度对AlSi_9Mg半固态组织的影响
2.
Computer Aided Prediction of Effects of Pouring Temperatureon on the Solidification Structure for Twin-roll Thin Strip;
浇注温度对双辊薄带凝固组织影响的模拟预测
3.
Select the Proper Pouring Temperature of Castings Depending on Mold Filling Simulation;
依据充型模拟确定铸件浇注温度
4) casting temperature
浇注温度
1.
Effects of Casting Temperature on Al-5Cu Alloy in Indirect Squeezing Casting;
浇注温度对间接挤压铸造Al-5Cu合金的影响
2.
This paper researches the influence of modification process parameters(such as modification agent content, modification temperature, modification time and casting temperature etc.
研究了工业生产Sr变质亚共晶Al-7%Si合金时,变质剂含量、变质温度、变质时间、浇注温度等工艺参数对合金共晶硅细化及其性能的影响。
3.
The SiC foam/SiC_p/Al composites were fabricated by squeeze casting at different casting temperatures and the effect of casting temperature on mechanical properties of composites were investigated.
采用挤压铸造法制备出 SiC 泡沫/SiC_p 混合增强铝基复合材料,研究了不同浇注温度对复合材料力学性能的影响及影响机制。
5) melt temperature
熔体温度
1.
Prediction of Injection Pressure and Melt Temperature of Injection Molding by Radial Basis Function Network;
基于神经网络技术的注塑成型注射压力和熔体温度预测
2.
Effects of Melt Temperature on Solidified Structure of Sn-Sb Peritectic Alloy in Ultrasonic Field;
超声场下熔体温度对SnSb合金凝固组织的影响
3.
The stress distribution of polycarbonate injection molded parts is tested by the photo-elastic experiment under different gate type and different melt temperature,and the tensile strength and luminous transmittance are tested.
用光弹实验测试不同浇口类型、不同熔体温度下聚碳酸酯透明注塑制品的应力分布,并测试了制品的拉伸强度和透光率。
6) temperature of concrete block
浇注块的温度
补充资料：浇注石墨
分子式：
CAS号：
性质：采用低黏度液态热固性合成树脂填加粉状石墨和固化剂，于常压、常温或加热条件下注模成型得到的制品。具有良好的导电性、化学稳定和物理机械性能。可制成形状复杂的制品。缺点是抗冲击强度低，脆性较大，目前应用不广泛。
CAS号：
性质：采用低黏度液态热固性合成树脂填加粉状石墨和固化剂，于常压、常温或加热条件下注模成型得到的制品。具有良好的导电性、化学稳定和物理机械性能。可制成形状复杂的制品。缺点是抗冲击强度低，脆性较大，目前应用不广泛。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条