1) RuO2/C support
RuO2/C载体
1.
The morphology and crystalline structure of the RuO2/C support and Pt/RuO2/C catalyst were then characterized by TEM and XRD.
使用透射电镜和X射线衍射分析RuO2/C载体、Pt/RuO2/C催化剂的形貌及晶体结构;循环伏安、稳态阳极腐蚀和旋转圆盘电极等测试电化学性能。
2) Pt/RuO2/C catalyst
Pt/RuO2/C催化剂
1.
Firstly,a wet chemical method was employed to synthesize the RuO2/C nanocomposite,from which Pt/RuO2/C catalyst was further prepared by a microwave method.
应用湿化学法制备RuO2/C纳米复合物,并以其为载体借助微波法制备成Pt/RuO2/C催化剂。
3) Ti/RuO_2
Ti/RuO2
1.
Color removal of simulated Methyl Orange wasterwater was studied systematically by electrolysis in an electrolytic cell with the Ti/RuO_2 as the anode and the foam nickel electrode as the cathode.
在阳极和阴极分别为Ti/RuO2、泡沫镍的无隔膜电解槽内,对甲基橙的电化学脱色效果进行了研究,探讨了外加电压、电解质量浓度、反应时间、以及NaCl的投加量对甲基橙脱色的影响。
4) C/C preform
C/C坯体
1.
Effect of C/C preform on the tribological behavior of C/C-Cu composites;
C/C坯体对C/C-Cu复合材料摩擦磨损行为的影响
2.
C/C-SiC composites were fabricated by molten silicon infiltration(MSI) to C/C preforms prepared by chemical vapor infiltration(CVI).
结果表明:C/C坯体反应溶渗硅后复合材料的物相组成为SiC相、C相及残留Si相。
3.
C/C-SiC composites were fabricated by reactive melt infiltrating(RMI) Si to different C/C preforms prepared by chemical vapor infiltration(CVI) or resin impregnation and carbonization (IC).
以PAN基炭纤维(Cf)针刺整体毡为预制体,用化学气相渗透(CVI)、浸渍炭化(IC)方法制备了不同炭纤维增强炭基体的多孔C/C坯体,采用反应熔渗(RMI)法制备C/C-SiC复合材料,研究了渗Si前后坯体的密度和组织结构。
5) airborne 14C
气载~(14)C
6) Apolipoprotein C(Apo C)
载脂蛋白C(Apo C)
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条