2) two-shot moulding process
二次注模成型
1.
MIDs manufacture include two-shot moulding process and photoimaging process, which can produce necessary circuit pattern on the thermoplastic substrate by directly metalizion process.
MIDs采用二次注模成型和光电成像制造方法,在高分子树脂构件表面上直接进行金属化处理,形成设计所需的功能电路。
3) second injection
二次注射
1.
In order to solve the problem that there were injection molding bugs on the products caused by the unevenness of the thickness, and the insert in the product, second injection mold was applied.
为了解决产品由于壁厚不均匀且带有嵌件而产生的注射成型缺陷问题,决定采用二次注射的方法。
4) secondary molding with prior injection and compressingafter
先注后压二次成型
5) injection molding
注射成型
1.
An integrated simulation of residual stress and warpage for plastic injection molding;
塑料注射成型应力与翘曲的集成模拟
2.
Influence of processing parameters in injection molding on replication fidelity of microstructure parts;
注射成型工艺参数对微结构零件复制度的影响
3.
Evaluation of Hesitation Based on CAE for Plastic Injection Molding;
基于CAE场量的塑料注射成型滞流缺陷评价
6) injection
[英][ɪn'dʒekʃn] [美][ɪn'dʒɛkʃən]
注射成型
1.
Secondly,the injection of solid tire and three structures for injection was studied.
探讨了实芯轮胎生产方法,阐述了传统模压法、缠绕法和离心浇注法的工作原理及其优缺点,研究了实芯轮胎的注射成型及3种注射型轮胎结构,并对未来发展趋势进行了展望。
2.
A turning injection mould is proposed for forming the kind of parts.
阐述了深腔塑件注射成型时可能采取的工艺方案,同时对每种方案进行了分析和比较,提出了采用转动式注射模成型该类零件的模具结构,并对模具结构进行了介绍。
3.
Through the study of the injection mould for the plastic conduit,the problems on design of multi_cavity injection moulds for deep_cavity plastic parts were solved.
通过对导管塑件注射成型模具的研究和探讨 ,解决了深腔塑件的多型腔注射模具设计问
补充资料：无模成型
分子式：
分子量：
CAS号：
性质：一种不需要阴模和阳模的热成型方法。将制成的塑料片夹紧在圆形夹具上、加热使之软化，然后吹入压缩空气使向上膨胀为半球状，称为无模吹塑成型；还可施以真空吸拉，使之向下膨胀为半球形，则称作无模真空成型。
分子量：
CAS号：
性质：一种不需要阴模和阳模的热成型方法。将制成的塑料片夹紧在圆形夹具上、加热使之软化，然后吹入压缩空气使向上膨胀为半球状，称为无模吹塑成型；还可施以真空吸拉，使之向下膨胀为半球形，则称作无模真空成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条