1) bounded kinematic hardening
有限随动强化
1.
In order to perform lower-bounded shakedown analysis for bounded kinematic hardening structures,numerical approachs based on element free Galerkin(EFG) method are developed.
基于层叠模型和两面屈服准则,发展了有限随动强化结构安定下限分析的正交基无单元Galerkin法。
2) kinematic hardening
随动强化
1.
Numerical algorithm of plasticity with superposed A-F kinematic hardening rule;
叠加型A-F类随动强化模型塑性应变的数值计算法
2.
To theoretically investigate the influence of Bauschinger effect on springback in sheet metal stretch bending,the constitution relation of a kinematic hardening was used to determine the stress distributions of stretch bending by numerical calculation,so that the springback was calculated.
为从理论上研究包辛格效应对板材拉弯回弹的影响,利用随动强化本构方程,采用数值方法,确定拉弯的应力分布,由此计算回弹,并与按等向强化本构方程计算的结果加以比较,根据应力分布的特点,分析包氏效应对拉弯回弹的作用。
3.
The elastoplastic constitutive formulas are deduced based on the scalar damage variables with the kinematic hardening effects of concrete.
混凝土三参数统一强度理论在Haigh-Westgaard空间的偏平面上的边界线为十二边形,通过调整中间主应力的影响系数消除角点的奇异性,根据相关流动准则推导基于标量损伤的弹塑性本构方程,考虑了混凝土材料的随动强化效应,结合塑性损伤理论给出了应力计算的数值方法,编制了相应的Fortran语言程序,并将其用于钢管混凝土构件承载能力的计算,计算结果验证了所用模型的预测能力。
3) kinematic hardening rule
随动强化律
1.
A discussion of several kinematic hardening rules based on nonproportional cyclic experiments of 42CrMo steel is presented.
对于４２ＣｒＭｏＡ钢的非比例循环实验，讨论了几个随动强化律的适用性，其中包括Ｐｒａｇｅｒ、Ｚｉｇｌｅｒ、Ｃｈａｂｏｃｈｅ、Ｍｒｏｚ和Ｔｓｅｎｇ－Ｌｅｅ强化律。
4) perturbation stochastic finite element
摄动随机有限元
1.
Application of perturbation stochastic finite element method in the reliability analysis of rock bedding slope;
摄动随机有限元法在顺层岩质边坡可靠性分析中的应用
2.
The basic jib model under stochastic loads is built which consists of 390 plate elements and the mean value and deviation of the first principal stress in the maximum stress element are calculated with perturbation stochastic finite element method.
在载荷随机的情况下 ,把铁路救援起重机基本臂模型离散为 390个板壳单元 ,然后利用摄动随机有限元计算最大应力单元主应力的均值和方差。
5) co-rotational finite element method
随动有限元法
6) multilinear kinematic hardening rules
多线性随动强化
1.
A simple sample with crack is analyzed on thermal fatigue applying finite element method and multilinear kinematic hardening rules of material, based on which the processes and rules of the thermal fatigue crack opening are studied.
用有限元方法并考虑材料的多线性随动强化性质对带有裂纹的简单试件模型进行热疲劳分析,研究热疲劳裂纹张开的过程和规律。
补充资料：有限
1.有限制;有限度。 2.指数量不多;程度不高。 3.哲学范畴。指有条件的﹑在空间和时间上都有一定限制的﹑有始有终的东西。相对于"无限"而言。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条