1) hoisting and installation track system
吊装轨道
1.
Strength analysis was performed on the hoisting and installation track system for the gas turbine of a ship.
以某船为研究背景,进行了燃气轮机吊装轨道的强度分析研究。
2) monorail hoist runway
单轨吊道
1.
This paper analyzes on the possibility of adopting the anchor line suspended monorail hoist runway, and designs and develops the hanger of the anchor line suspended monorail hoist runway, which solves the problem of the erection of the monorail hoist runway in the transportation adopting the monorail hoist in the ground coal road stage with the total bolt support.
分析了用锚索悬吊单轨吊道的可行性,设计并制作了用锚索悬吊单轨吊道的吊具,解决了全锚支护底煤巷顺槽采用单轨吊进行运输时单轨吊道的安装问题。
3) crane rail
吊车轨道
1.
A new type of the fixture for a crane rail can be designed by the following steps: start off with the analysis of various loads of a crane rail, then the horizontal force of the rail top is calculated and a forced diagram of the fixture of the rail is given, by which the horizontal force and the vertical thrusting force of the rail fixture are obtained.
从分析吊车轨道上的各种荷载入手 ,进而计算出轨道顶部的设计水平力 ,给出了轨道固定件的受力简图 ,求出轨道固定件受到的水平力和竖向推力 ,从而设计出新型的轨道固定件。
2.
A novel two-component epoxy adhesive with high adhesive strength was developed to meet the bonding requirement of mounting plate of crane rail and steel beam in the workshop.
根据车间内钢梁上吊车轨道安装底板与钢梁粘接的具体要求,研制了一种中温固化双组分环氧胶粘剂。
4) rail-mounted gantry cranes
轨道吊
1.
A 6-degree-of-freedom wire-driven parallel crane robot for containers handling replacing rail-mounted gantry cranes is presented.
提出一种6自由度的绳牵引并联起重机器人,以取代现有的轨道吊。
5) rail mounted gantry crane
轨道龙门吊
1.
Rail-gnawing of rail mounted gantry crane and rectifying deviation control;
轨道龙门吊行走大车的啃轨问题及纠偏控制
6) gantry-crane
轨道吊车<冶>
补充资料：吊装
分子式：
CAS号：
性质：又称吊烧。细长形瓷件生坯头部预留可作为支撑的烧头或先穿入已烧好的耐温瓷棒，将坯体悬吊起来烧成，出窑后用瓷件切割机或电阻丝局部加热急冷法将吊烧头除去。对生坯强度较低的坯体，其底部可用坯垫支撑，烧成瓷件过程中因坯体收缩，瓷件自动离开坯垫，而由头悬空支撑。吊装可大大减少细长形，棒形瓷件烧成时的弯曲变形，并可提高装窑密度。辊道窑瓷套管、测温热电偶管等都可采用吊装技术，效果良好。
CAS号：
性质：又称吊烧。细长形瓷件生坯头部预留可作为支撑的烧头或先穿入已烧好的耐温瓷棒，将坯体悬吊起来烧成，出窑后用瓷件切割机或电阻丝局部加热急冷法将吊烧头除去。对生坯强度较低的坯体，其底部可用坯垫支撑，烧成瓷件过程中因坯体收缩，瓷件自动离开坯垫，而由头悬空支撑。吊装可大大减少细长形，棒形瓷件烧成时的弯曲变形，并可提高装窑密度。辊道窑瓷套管、测温热电偶管等都可采用吊装技术，效果良好。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条