|
|
您的位置： 首页 -> 词典 -> 划分岩性地质剖面
1) dipartition of lithological sections
划分岩性地质剖面
2) seismic lithological section
地震岩性剖面
1.
Usingthis method,we can convert the seismic section to the seismic lithological section which reappear the characters of geological section precisely.
它将地震剖面转化成地震岩性剖面，精确地再现了地下地质剖面特征。
3) resolution of lithologic section
岩性剖面分辨率
4) profile division
剖面划分
1.
By Studing the developmental characteristics of purple forest soil (PFS) in Chishui, Guizhou province, this paper summarizes a method of dividing PFS profile, and settles the problems of the obscurity in the profile division and of the impossible comparison among each division result, providing a basis for the further study of PFS.
本文通过对赤水紫色森林土壤发育特点的研究，总结出划分紫色森林土壤剖面的方法，解决了紫色森林土壤剖面划分不清楚，研究人员之间各自划分的结果不能对比的问题，为进一步研究紫色森林土壤打下了基础。
5) texture profile analysis
质地剖面分析
1.
The effects of soy,sugar,salt on the texture characteristics of steamed pork bacon with rice powder were studied by the method of texture profile analysis.
采用质地剖面分析法(TPA,texture profile analysis)研究了酱油、白糖、食盐对粉蒸肉质构的影响,结果表明:带皮肥肉和瘦肉的硬度和耐嚼性随着酱油的增加而增加,无皮肥肉的弹性、凝聚性和回复性变化较大;白糖对带皮肥肉的硬度、弹性、回复性和瘦肉的耐嚼性影响显著;食盐对带皮肥肉的硬度和回复性、无皮肥肉的弹性和回复性影响不显著。
2.
Tissue structure and rheological properties of foot and visceral muscles of both raw and heated turban shell with different times(5,20 and 60 min) were investigated,texture profile analysis was experimentized,which would provide a theoretical foundation for the development of the produce of turban shell and optimizing the technological process.
研究了海螺不同部位的肌肉在鲜活和加热(100℃)过程中组织构造及其流变学特性的变化,并进行了质地剖面分析(TPA),为海螺深加工制品的开发及加工工艺的优化提供了依据。
3.
Tissue structure and rheological properties of both raw and heated turban shell foot with different time(5,20,60 min) were investigated,and texture profile analysis and sensory evaluation were experimented,which would provide theoretic basis and scientific gist for opening up the production of turban shell foot and optimizing process.
研究了鲜活和不同加热条件下(5、20、60 m in)海螺足部的组织构造及其流变学特性的变化,并进行了质地剖面分析(TPA)和感官评定试验,为海螺深加工制品的开发及加工工艺的优化提供理论基础和科学依据。
6) lithology profile
岩性剖面
1.
Establish formation lithology profile by using mud logging technology method;
应用录井技术建立地层岩性剖面方法探讨
补充资料：关于solidworks 中的剖面线中的剖面线
solidworks的剖面线线型定义和autocad相同,它使用了autocad的剖面线定义方法,与autocad通用.因此,可以对剖面线进行定义. 方法:修改\SolidWorks\lang\chinese-simplified\sldwks.prn 用笔记本打开该文件,添加需要的线形.如 ;; Based on AutoCAD Ver.13.0s Hatch Pattern File ;;;; solidworks 区域剖面线定义文件 :: *金属, (Iron BrickStone), ANSI Iron, Brick, Stone masonry 45, 0,0, 0,.125 *塑料, (Lead Zinc Mg), ANSI Lead, Zinc, Magnesium, Sound/Heat/Elec Insulation 45, 0,0, 0,.125 135, 0,0, 0,.125 *玻璃,AR-GLASS@1.0 45,0,0,0,0.5, 0.5,-0.5 45,0,0.1414214, 0,0.5, 0.3,-0.7 45,0.1414214,0, 0,0.5, 0.3,-0.7 *软木, Cork material@1.0 0, 0,0, 0,.125 135, .0625,-.0625, 0,.35355339, .176776696,-.176776696 135, .09375,-.0625, 0,.35355339, .176776696,-.176776696 135, .125,-.0625, 0,.35355339, .176776696,-.176776696 *无, None 删除不需要的定义类型,可以大大提高solidworks 的启动速度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|