1) the mechanism of dry strength additives
增干强机理
1.
Meanwhile,the mechanism of dry strength additives is analyzed according to the theory of paper forming.
同时,结合纸页的成形原理,分析了增干强剂的增干强机理。
2) strengthening mechanism
增强机理
1.
By proper dispersion and hot pressing injection of the mixture, the Al2O3/SiO2 ceramic cores nano-composites were prepared, and the strengthening mechanism were studied.
用粉体分散及热压注方法制备了Al2O3/SiO2纳米复合陶瓷型芯材料,研究了Al2O3/SiO2纳米复合陶芯材料的增强机理。
2.
This paper expounds the strengthening mechanism of steel fiber concrete,and connecting with the example of the application of steel fiber concrete in the beam pavement construction in Haikou Prefabricated Beam Plant,discusses on the optimum design scheme of the mixture ratio of the steel fiber concrete,and sums up the features of the construction techniques.
阐述了钢纤维混凝土增强机理,结合海口制梁场梁体铺装层钢纤维混凝土的应用实例,论述了钢纤维混凝土配合比优化设计方案,总结了其施工技术特点。
3.
The article briefs the application of post pressure grouting to bored pile by describing the strengthening mechanism of pressure grouting to the resistance at pile side and pile end and by presenting quality-control essentials of post pressure grouting.
文章简要介绍了国内灌注桩后压浆法的应用情况,分析了灌注桩桩侧后压浆和桩端后压浆的增强机理,并结合工程实例介绍了后压浆质量控制要点。
3) reinforcement mechanism
增强机理
1.
Study on reinforcement mechanism of short fiber/rubber foam composite;
短纤维对橡胶发泡复合材料增强机理的细观分析
4) strengthen mechanism
增强机理
1.
Epoxy resin modified concrete material for mechanical properties and strengthen mechanism
环氧树脂混凝土力学性能及增强机理
2.
From the steel fiber polymer concrete's experiment material and the method of preparation the strengthen mechanism of steel fiber was studied with the mechanics principle in brief.
从钢纤维聚合物混凝土的实验材料和制备方法入手,利用力学原理简单研究了钢纤维的增强机理,并且利用有限元的方法,对机床的床身进行模拟,得到了不同截面尺寸的固有频率,通过同结构的钢纤维聚合物混凝土和铸铁床身进行谐响应分析,证明了钢纤维聚合物混凝土床身良好的动态性能。
3.
So, reseaching the characteristics of the phenol-formaldehyde resin with different substituents and the strengthen mechanism of the resin to paper would have great theoretic and guidance significance to produce and use the modified phenol-formaldehyde resin.
因此,研究不同取代基的酚醛树脂的特性及其对纸张的增强机理,对改性酚醛树脂的生产和使用有重要的理论指导意义。
5) reinforced mechanism
增强机理
1.
Studying of the Strength Reinforced Mechanism of the LSFRC and LHFRC;
层布式钢纤维、混杂纤维混凝土的增强机理研究
2.
Flexural Strength Reinforced Mechanism and Micro-mechanism Analysis of LSFRC;
层布式钢纤维砼弯拉强度增强机理及细观力学分析
3.
Combined with practical work this paper introduces the reinforced mechanism and construction technology of steel fiber reinforced concrete and according to the problem that how to develop reinforcement effect discussion is made.
结合工程实例 ,介绍了钢纤维混凝土的增强机理与施工技术 ,就如何有效地发挥钢纤维对混凝土的增强效应进行了论述 ,指出钢纤维混凝土具有普通钢筋混凝土所没有的优良性能。
6) enhancing mechanism
增强机理
1.
Based on the principle that hydroxy terminated fluorosilicone oil inactivates the surface of silica agrogel, the enhancing mechanism of flurosilicone rubber has been studied.
并通过 Ｉ Ｒ 光谱分析羟基氟硅油在白炭黑表面的钝化作用探讨氟硅橡胶增强机理。
补充资料：L-H机理
分子式：
CAS号：
性质：又称L-H机理。一种以表面反应为控制步骤，以两个吸附着的分子进行表面反应的多相催化机理。即两个反应物先吸附在固体催化剂上，在表面上反应，产物再脱附。表面反应为控制步骤，吸附与脱附速度远大于表面反应速度。反应速度与两个反应物在催化剂表面上的覆盖度成正比。
CAS号：
性质：又称L-H机理。一种以表面反应为控制步骤，以两个吸附着的分子进行表面反应的多相催化机理。即两个反应物先吸附在固体催化剂上，在表面上反应，产物再脱附。表面反应为控制步骤，吸附与脱附速度远大于表面反应速度。反应速度与两个反应物在催化剂表面上的覆盖度成正比。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条