1) high hot resistance
耐热性能强
3) heat resistance
耐热性能
1.
Influence of antimony addition on heat resistance of AE41 magnesium alloy;
Sb合金化对AE41镁合金耐热性能的影响
2.
Effect of several antioxidants on heat resistance of silicone sealant;
几种抗氧剂对有机硅密封剂耐热性能的影响
3.
Effects of methacryl-POSS on the heat resistance of organic silicone resin;
甲基丙烯酰氧基倍半硅氧烷对有机硅树脂耐热性能影响
4) thermal stability
耐热性能
1.
Effects of the different inorganic fillers(like CaSO4 whisker,carbon black and montmorillonite) on the mechanical properties and thermal stability were investigated.
研究结果表明:几种无机填料均能使弹性体的撕裂强度和耐热性能有不同程度的提高,但只有硫酸钙(CaSO4)晶须对提高拉伸强度有贡献。
2.
Its thermal stability was tested and analyzed.
添加插层蒙脱土(OMMT),制备了有机蒙脱土/木粉/聚氯乙烯(OMMT/WF/PVC)纳米复合材料,对OMMT/WF/PVC的耐热性能进行了测试和分析。
3.
The thermal stability and dynamic mechanical properties of cured blends were studied by TGA and DMA.
利用TGA和DMA研究了Ben/E51固化物的耐热性能和动态力学性能,结果显示,共聚体系的分解温度与用酸酐或胺固化的环氧树脂相比提高了70~80℃,玻璃化转变温度提高了30~70℃。
5) heat-resistance
耐热性能
1.
Studies on the effect of microphase separation on heat-resistance property of polyurethane based on TDI
微相分离对聚氨酯弹性体耐热性能的影响研究
2.
TG and DSC analysis results at different temperature indicated that the thermal decomposition temperature of PUE based on NDI was higher than that of PUE based on TDI, which showed the heat-resistance of the former was superior to that of the latter.
以1,5-萘二异氰酸酯(NDI)和甲苯二异氰酸酯(TDI)分别与聚己二酸乙二醇丙二醇酯二醇(PEPA)合成了聚氨酯弹性体,通过热失重分析和差示扫描量热分析发现,NDI型聚氨酯弹性体的热分解温度比TDI型聚氨酯弹性体高,说明NDI型聚氨酯弹性体具有更好的耐热性能;通过不同温度下弹性体的力学性能高温保持率对比分析,也说明了NDI型聚氨酯弹性体的耐热性能优于TDI型聚氨酯弹性体。
3.
It is proved that the thermosetting phenolic resin modified with silicone is good at heat-resistance,toughness,shear strength and dissolution property,which can b.
本文中通过IR,DSC,TG以及剪切强度和剥离强度,对这种热固性有机硅改性酚醛树脂的粘接性能,耐热性能,耐久性能和固化工艺进行考核,证明这种方法制备的树脂粘接强度高,耐热性能优异,耐久性能良好,可以作为耐热结构胶粘剂在航空航天领域应用。
6) thermal resistance
耐热性能
1.
The research progress of thermal decomposition mechanism as well as thermal resistance improvement through molecular design or copolymerization/blending modification for the newly developed thermosetting polybenzoxazine at home and abroad is reviewed.
综述了国内外对新型热固性树脂苯并恶嗪聚合物的热分解机理、分子结构设计以及共聚/共混改性改善聚合物耐热性能的研究进展。
2.
Effects of CaCO3 dosage on mechanical properties and thermal resistance of CaCO3/side-active polysiloxane composite were studied.
用CaCO3对具有侧活性结构的室温固化耐高温有机硅树脂进行改性,制备了CaCO3/侧活性聚硅氧烷复合材料,研究了CaCO3用量对该复合材料的力学性能和耐热性能的影响。
补充资料：耐热
1.指生物在一定的高温下﹐能维持生命活动。 2.指材料﹑机件等在较高温度下能保持原有的机械﹑物理等性能。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条