2) pulsating heat pipe
脉动热管
1.
Advances in pulsating heat pipe and its heat transfer characteristics;
脉动热管及其传热特性影响因素研究进展
2.
Experimental investigation on flow and heat transfer of pulsating heat pipe;
环路型脉动热管的工质流动和传热特性实验研究
3) pulsating heat pipes
脉动热管
1.
With the miniaturization of electronic components and equipments, their heat transfer make pulsating heat pipes which are new and high efficiency heat transfer components gain more and more study.
日益小型化的电子器件和设备的散热问题促使脉动热管这种新型高效的传热元件得到越来越广泛的研究。
2.
Adopting R123 as the working medium,the effects of liquid filling ratio and heating mode on heat transfer limit were qualitatively analyzed on the open loop pulsating heat pipes test fig consisted of 40 elbows bent by fine copper tubes with inner diameter of 1 mm and 2 mm,and the experimental values were compared with calculated values by the Katpradit\'s correlations for heat transfer limit.
在由内径分别为1 mm和2 mm的细铜管弯曲而成的2组40弯头开式回路脉动热管试验装置上,采用R123为工作介质,定性分析了充液率及加热方式对传热极限的影响,并将试验值与Katpradit传热极限关联式的计算值进行了比较,结果表明:随着充液率的提高,传热极限先增大而后减小,存在一个最佳充液率(约50%);在3种加热方式中,垂直底部加热有助于脉动热管取得较大的传热极限值,而垂直顶部加热则对应较小的传热极限值。
3.
The structural and operational characteristics between two kinds of pulsating heat pipes(PHPs) were compared.
对圆管式及方槽板式脉动热管试验进行了结构及运行特性的比较。
4) heat pipe exchanger
热管换热器
1.
Nomographic method for design and calculation of heat pipe exchanger;
热管换热器设计计算的线算图法
2.
Application of gas-gas heat pipe exchanger in recovering waste heat from powers tation;
气-气热管换热器在电站余热回收中的应用
3.
This text introduced the work principle,function characteristics and the superiority compared of other exchanger of heat pipe exchanger.
热管换热器是一种高效的换热装置。
5) heat pipe heat exchanger
热管换热器
1.
Optimum design of high temperature heat pipe heat exchanger;
高温热管换热器优化设计
2.
Optimum design for heat pipe heat exchanger in air-conditioning ventilation system;
空调排风能量回收用热管换热器的优化设计
3.
Numerical simulation and experimental study of miniature heat pipe heat exchanger in enclosed space;
封闭空间内小型热管换热器模拟与实验研究
6) heat exchanger tubes
换热器管
1.
Present the procedure of hydraulic expansion jointing of the heat exchanger tubes,hydraulic expansion jointing theory and the caculation.
介绍换热器管液压胀接的过程、原理及计算方
补充资料：脉动
1.指动脉的跳动。 2.机器或电流强度等像脉搏那样地周期性运动或变化。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条