说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 重力热管换热器
1)  Gravity Heat Pipe Heat Exchanger
重力热管换热器
1.
Application of the Gravity Heat Pipe Heat Exchangers in Production of Pyromellitic Dinahydride Anhydride;
重力热管换热器在均酐生产中的应用
2.
Application of Gravity Heat Pipe Heat Exchangers in CO Gas Making Furnaces;
重力热管换热器在CO造气炉系统中的应用
2)  heat pipe heat exchanger design
热管换热器热力设计
3)  heat pipe exchanger
热管换热器
1.
Nomographic method for design and calculation of heat pipe exchanger;
热管换热器设计计算的线算图法
2.
Application of gas-gas heat pipe exchanger in recovering waste heat from powers tation;
气-气热管换热器在电站余热回收中的应用
3.
This text introduced the work principle,function characteristics and the superiority compared of other exchanger of heat pipe exchanger.
热管换热器是一种高效的换热装置。
4)  heat pipe heat exchanger
热管换热器
1.
Optimum design of high temperature heat pipe heat exchanger;
高温热管换热器优化设计
2.
Optimum design for heat pipe heat exchanger in air-conditioning ventilation system;
空调排风能量回收用热管换热器的优化设计
3.
Numerical simulation and experimental study of miniature heat pipe heat exchanger in enclosed space;
封闭空间内小型热管换热器模拟与实验研究
5)  two-phase closed thermosyphon
重力热管
1.
Feasibility of two-phase closed thermosyphon heating method;
重力热管井筒伴热方式可行性分析
2.
Theoretical and experimental investigation on heat transfer characteristics in a cryogenic two-phase closed thermosyphon;
低温重力热管传热性能的理论与实验研究
3.
The two-phase closed thermosyphon(TPCT),which is an effective heat transfer unit,has been widely applied in many fields.
重力热管作为一种高效的传热元件已在众多领域得到广泛应用,然而其性能受到传热极限的制约。
6)  gravity heat pipe
重力热管
1.
Experimental research of enhanced heat transfer for spiral groove gravity heat pipe;
螺旋槽重力热管强化传热实验研究
2.
Performance analysis of gravity heat pipe with inner screw threa d;
内螺纹重力热管的特性分析
3.
The characteristics investigation of the condensation segment in gravity heat pipe with inner screw thread;
内螺纹重力热管冷凝段的特性研究
补充资料:热管换热器
      以热管作为传热元件的换热器。热管是20世纪60年代由航天工业开发的一种新型传热元件,能在很小温差下传递巨大的热流量。近年来,已推广应用到各个工业部门。
  
  热管  内部设有传输液体的吸液芯的金属管,在抽除其中不凝性气体并充以某种工作液体后封闭而成(图1)。常用的工作液体有水、氨、乙醇、丙酮、钠、锂和汞等,不同工作液体适用于不同工作温度。在热管被称作蒸发段的一端,工作液体从外界热源受热而汽化,流向称作冷凝段的另一端,将热量传给外界受热体而冷凝;冷凝液沿吸液芯流回蒸发段,如此不断循环,实现热量在两个外部物体间的连续传递。沸腾传热和冷凝传热的传热分系数很大,管外侧还可用翅片加强传热,因此即使热管两端的温度差很小,仍可获得很高的传热速率。从热管的传热速率和相应的温度差折算而得的表观热导率,可达到良好热导体的103~104倍。  根据使冷凝液返回蒸发段的推动力,热管的主要类型有:①毛细热管。依靠紧贴管壁的多孔吸液芯(如编织丝网、烧结多孔层或管壁上开的细槽)对冷凝液的毛细管作用,使冷凝液从冷凝段流回蒸发段。②重力热管。冷凝液依靠重力流回蒸发段。
  
  热管换热器的构造和应用  换热器由热管束构成,中间用块隔板把冷热流体隔开(图2),热管束的蒸发段浸在热流体中,冷凝段则浸在冷流体中。当管外传热分系数小时(如气体对流传热),可在管外加翅片来增加传热表面和增强流体湍动,使其与管内相变传热的高传热分系数相匹配。
  
  热管换热器在化工生产中的应用起始于70年代初,主要有利用余热的热管空气预热器和热管废热锅炉,以及控制固定床反应器中催化剂床层温度用的换热器等。随着廉价耐用的新型热管的出现,其使用范围必将进一步扩大。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条