1) factor quotient
形率
1.
This paper is to find out the relation of diameter at breast height(DBH),tree height(TH) and factor quotient to form factor,then we can calculate single standing-tree\'s volume in a easier way.
本文针对吉林省汪清县境内东北部金沟岭林场云杉这一树种，通过对175株标准木数据进行方差分析、相关分析和精度比较，旨在找到胸径、树高、形率与形数的关系，从而达到简单计算云杉单株立木材积的目的；并且对基尼系数在描述云杉(Picea koraiensis)干形方面做了进一步讨论。
2) deformation rate
变形率
1.
Study is made of the effect of rolling temperature and single-pass deformation rate on Kovar/Cu/Kovar laminates .
分析研究了轧制温度和单道次变形率对Kovar/Cu/Kovar层状复合材料制备的影响。
2.
Taking U71Mn steel as an example, the effect of heating time, protective material and rolling deformation rate on decarburization and oxidation of the slab has been studied by observing the changes of the slab's decarburized layer during the course of heating and rolling.
本文结合武钢大型厂U71Mn重轨钢，通过观察在加热和轧制过程中的钢坯脱碳层的变化，研究了加热时间、保护涂料和轧制变形率对重轨钢坯脱碳和氧化的影响。
3) deformation rate
形变率
1.
Differential scanning calorimetry (DSC) was employed to investigate the relation of deformation rate and eutectic melting activity energy of AZ91D magnesium alloy by SIMA method.
采用DSC技术研究了SIMA法制备半固态AZ91D镁合金坯料过程中形变率与共晶熔化激活能的关系。
2.
Taking U71Mn steel as an example, the effect of heating time, protective coating and rolling deformation rate on decarburization and oxidation of the heavy rail slab has been studied by observing the changes in the slab's decarburized layer in the course of heating and rolling.
以U71Mn钢为例,通过观察在加热和轧制过程中的钢坯脱碳层的变化,研究加热时间、保护涂料和轧制形变率对重轨钢坯脱碳和氧化的影响。
4) nucleation rate
形核率
1.
Ferrite nucleation rate in undercooled austenite during deformation in low carbon (Mn) steels with different C and Mn contents;
碳、锰含量对低碳(锰)钢过冷奥氏体形变过程中铁素体形核率的影响
2.
Based on the calculated method of stable nucleation rate,a theoretical analysis has been made on the effect of deformation above A_(e3)temperature to the nucleation of eutectioid ferrite transformation in low carbon steel.
应用Pillbox模型研究了低碳钢高温变形对先共析铁素体相变形核率的影响,主要依据稳态形核率方法进行计算。
3.
According to classical solidification theory and the mechanism of solidification microstructure under pulse current,the effect of super-cooling degree variation on nucleation rate was discussed.
通过讨论过冷度的变化对形核率的影响,研究了电流产生的电磁力效应及焦耳热效应对过冷度的影响,建立了电流与过冷度的关系式。
5) strain rate
变形速率
1.
The strain-stress curves were measured using Gleeble 3800 thermal mechanical simulator at strain rates of 0.
采用Gleeble 3800型热模拟试验机测定了含磷高强无间隙原子钢(IF钢)在变形温度为950,850℃,单道压缩变形量为50%,变形速率为0。
2.
The relationship between volume fraction of ultra-fine grained ferrite and strain rate was investigated for a plain low carbon steel (type Q235).
针对普通碳素钢(Q235类型),研究在Ae3~Ar3温度区间内采用形变诱导铁素体机制获得超细晶铁素体的数量与变形速率的相互关系。
3.
The influences of different technology parameters,such as temperature,strain,strain rate,on deformation resistance and microstructure of Q235 steel were investigated by Gleeble-1500 machine,which provided references for production practice.
借助Gleeble-1500热模拟机,研究了Q235钢不同温度、不同变形量及不同变形速率等参数对变形抗力及组织的影响规律,为生产实践提供了参考。
6) deformation rate
变形速率
1.
The influence of different deformation temperature and different deformation rate on SUS316L stainless steel flow and mircostructure
不同变形温度和变形速率对SUS316L不锈钢流变应力及金相组织的影响
2.
The deformation temperature and the deformation rate are the mai.
变形温度和变形速率是影响动态再结晶的主要因素,一般在高的变形温度和小的变形速率下,动态再结晶才能发生。
3.
And the variation of deformation rate of plasticized material was also simulated.
计算并分析了惯性摩擦焊接过程中接头塑性区的分布、扩展规律及其与工件轴向缩短的关系,并计算了塑性区金属塑性变形速率的分布和变化情况。
补充资料：大坝内部变形观测(见水工建筑物变形观测)
大坝内部变形观测(见水工建筑物变形观测)
daba neibubianxing guanCe大坝内部变形观测见水工建筑物变形观测。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条