1) FZ-TIG welding
FZ-TIG焊
1.
FZ-TIG welding of magnesium alloy
镁合金的FZ-TIG焊接方法
2.
FZ-TIG welding method is proposed by change the coating method of flux to solve this problem,In the method,a low melting point,low boiling point and low resistivity activating flux is coated on the weld surface center region and a high resistivity activating flux is coated on both sides before the TIG welding.
针对这个问题,本文通过改变活性剂的涂敷方式,提出了一种FZ-TIG焊接法,该方法是在传统TIG焊接前,在待焊焊道表面中心区域涂敷低熔沸点低电阻率活性剂,在两侧区域分别涂敷高熔沸点高电阻率活性剂,然后进行TIG焊接。
2) TIG welding
TIG焊
1.
Research on TIG welding of He-Ar mixed gas for SiCp/6061 Al composite;
SiC颗粒增强铝基复合材料氦-氩混合气体TIG焊研究
2.
Study on the parameter of TIG welding for die repairing;
TIG焊修理钢模的工艺参数的研究
3.
Usage and maintenance of welding and cutting machines50——Usage and maintenance of TIG welding machine;
焊接与切割设备的使用和维修(五十)——TIG焊机的使用与维修
3) A-TIG welding
A-TIG焊
1.
Weldability of activating flux in A-TIG welding for mild steel;
低碳钢A-TIG焊活性剂的焊接性
2.
Development of activating flux of A-TIG welding for stainless steel;
不锈钢A-TIG焊的活性剂研制
3.
Test of fluid flow forming in A-TIG welding pool;
A-TIG焊熔池流体流动形态的测试
4) TIG
[英][tɪɡ] [美][tɪg]
TIG焊
1.
Research on Narrow-gap TIG Welding Technology of Titanium Alloys;
钛合金窄间隙TIG焊技术研究
2.
The Composition and Microstructure Character of Bond Area of Super eutectic ZA Alloy in TIG Welding;
过共晶ZA合金TIG焊接熔合区成分及微观组织特征
3.
DESIGN OF SPECIAL TIG WELDING MACHINE USED FOR SIX PTP ASSEMBLY WELDING TO THE HYDRAULIC TORQUE CONVERTER;
液力变矩器总成六点TIG焊专机控制系统设计
5) TIG welding
TIG焊接
1.
The mechanical properties of Al-alloy 5A02 and its welded joint of CO2 laser welding and TIG welding were studied.
对铝合金5A02薄板本身的力学性能、CO2激光焊接与TIG焊接两种焊接方法的铝合金薄板焊接接头的力学性能进行了测定,并对轧制方向与垂直轧制方向的力学性能进行了测定。
2.
Based on the theory of magneto-hydro dynamics and real welding conditions,a three-dimension united mathematical model of TIG welding arc and weld pool was established.
根据磁流体动力学理论以及焊接的实际情况,建立了三维TIG焊接电弧与熔池的统一数学模型,避免了对电弧以及熔池界面条件的假定,使得对焊接电弧与熔池行为的分析与实际情况更近了一步。
3.
Four process parameters including welding current, welding speed, weld gap and eccentric value due to welding gun deviating the weld center were mainly studied during TIG welding process.
着重针对焊接电流、焊接速度、焊缝间隙以及焊枪偏离焊缝中心的偏心值4个焊接工艺参数进行了TIG焊接试验研究。
6) alternating current activating-tungsten inert-gas welding
交流A-TIG焊
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条