1) structure and property of the deposited layer
镀层组织性能
2) coat structure
镀层组织
1.
This paper studies the variation of hot dip Aluminum bath by adding small amounts of RE and Mg,as well as the effect of the RE and Mg addition on surface morphology of coated pieces and second phase,the thickness of outer Al layer and intermetallic layer As a result,RE can improve the quality of Aluminum bath and coat structure,but Mg can damage both of the
结果表明，微量稀土改善了铝液的质量和镀层的组织，而微量镁有损铝液质量和镀层组织。
3) Coating performance
镀层性能
1.
The results of testingon coating performances showed that the corrosion resistance wear resistance and hardness of thecoating were closeoly related to aging temp.
镀层性能测试结果表明，镀层的硬度、耐磨性及耐蚀性与时效处理温度密切相关：经400℃时效处理后镀层硬度最高，随时效温度的升高耐磨性能提高，而在HCl介质中的耐蚀性则基本呈降低趋势。
6) properties
[英]['prɔpəti] [美]['prɑpɚtɪ]
镀层性能
1.
The effects of methylacetic,glycocoll,and succinic acids as accelerators on the properties of electroless Ni-Sn-P coating were investigated in the presence of complex stabilizing agents used for electroless Ni-P plating,which was aiming at increasing the plating velocity and bath stability for the electroless Ni-Sn-P plating.
为了提高Ni-Sn-P化学镀层的沉积速率与镀液的稳定性,采用化学镀Ni-P合金复合稳定剂,研究了促进剂丙酸、甘氨酸、丁二酸对化学镀Ni-Sn-P镀层性能的影响,通过正交试验对3因素进行了优化,对镀速、孔隙率及显微硬度进行了测定。
2.
The influence of surfactant on the properties of electroplated Ni-SiC composite coating was studied by means of electron probe microanalysis,electrochemical analysis,and friction and wear test.
表面活性剂能改善复合镀层的性能,过去对离子型和非离子型表面活性剂影响复合镀层性能的研究报道不多。
补充资料：镀层
镀在其他金属或物体表面上的金属薄层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条