1) Modified hydrothermal method
改进水热合成法
2) modified hydrothermal process
改进的水热法
1.
The advantages of sol-gel and hydrothermal processes were integrated, and sol treatment was introduced to the hydrothermal process enabling perovskite-typed BaTiO3 nanopowders to be synthesized at 搇ow temperatures?conditions through this modified hydrothermal process.
结合溶胶-凝胶法和水热法的优点,将溶胶处理引入水热法中,采用改进的水热法在低温条件下合成了纯钙钛矿结构钛酸钡纳米粉,并与水热法合成产物进行了适当的比较。
3) improved WAWS
改进谐波合成法
1.
The method for the turbulent wind field simulation on the basis of improved WAWS and buffeting analysis on the basis of mixed programming are adopted.
基于大跨桥梁桥塔抖振时域分析,采用Matlab和ANSYS参数化设计语言(APDL),编写了相应程序和命令流,分析大跨桥梁抖振响应;给出了用改进谐波合成法模拟风场和用混合编程实现抖振分析的方法,在Matlab中实现风场模拟,用ANSYS中的瞬态分析实现抖振时域分析,并应用于湖北鄂东长江公路大桥桥塔抖振分析。
4) hydrothermal synthesis method
水热合成法
1.
The good application prospects of calcium sulfate whisker(CSW) was reveiwed,and it was pointed out that hydrothermal synthesis method is the best preparation method on the basis of experiment,the key technology in preparation and application process is proposed,it include the number of H_2O in producation,oritating growth controlling,surface modification.
评述了硫酸钙晶须(CSW)作为增强组元的良好应用前景,并在实验研究的基础上指出水热合成法是目前最成功的CSW制备方法,提出CSW制备和应用过程中的关键技术:即产物结晶水的控制、定向生长控制技术、表面改性技术,并进行了相应评论。
5) hydrothermal method
水热合成法
1.
Study on the condition for preparation of magnesia-alumina spinel by hydrothermal method;
水热合成法制备镁铝尖晶石工艺条件研究
2.
Synthesis of SAPO-34 molecular sieve with hydrothermal method
水热合成法合成SAPO-34分子筛
3.
Zr-doped TiO2 nanotubes were successfully synthesized by a hydrothermal method, using Zr-doped anatase TiO2 powders as precursor.
采用水热合成法以锐钛型Zr/TiO2纳米粒子为原料制备了掺杂锆二氧化钛纳米管,用TEM、EDS、BET对其进行了表征。
6) hydrothermal synthesis
水热合成法
1.
Effects of Tweens and sodium dodecyl sulfate as modifiers on hydrothermal synthesis of nanocrystals copper;
吐温和十二烷基硫酸钠作修饰剂对水热合成法制备纳米铜的影响
2.
Preparation and photocatalytic activities of TiO_2 nanoparticles with sol-gel method and hydrothermal synthesis;
利用Sol-Gel法与水热合成法制备纳米TiO_2及其光催化活性研究
3.
The nanometer bismuth oxide powders are prepared by hydrothermal synthesis method with bismuth nitrate solutions as raw material,strong aqua ammonia or sodium hydroxide as mineralizer.
以Bi(NO3)3为原料,浓氨水或NaOH为矿化剂,采用水热合成法制备纳米Bi2O3粉体,并以XRD,TEM和IR进行表征,以样品对水中罗丹明B的光催化降解性能为评价指标,对样品的光催化性能进行了评价。
补充资料：改进
改变旧有情况，使有所进步：～工作ㄧ操作方法有待～。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条