1) radioactive power dissipation
放射性功率耗散
2) plastic dissipation power
塑性耗散功率
1.
Limit analysis and plastic dissipation power of landslides;
滑坡极限分析与塑性耗散功率
2.
As an example,the method calculating the plastic dissipation power and saf ety factor of translation landslides is given.
基于塑性力学和极限分析理论,介绍和研究岩土体的体积塑性耗散功率和面积塑性耗散功率,并以平动性滑坡为例,给出滑坡体塑性耗散功率和安全因子的计算方法,具有一定的实用价值。
3) Dissipation power
耗散功率
1.
The result showed that the conductivity of NR compound filled with super conductive black was significantly better than that of NR compound filled with acetylene black; the appropriate loading level of the super conductive black was 30 phr; the AC resistance of the conductive NR compound was lower than its DC resistance i the dissipation power wh.
结果表明；填充高导电炭黑的天然橡胶的导电性能明显优于填充乙炔炭黑的天然橡胶，高导电炭黑的适宜填充量为３０份；导电天然橡胶交流电阻低于直流电阻；导致导电天然橡胶受热迅速破坏的耗散功率为２０—３０Ｗ，高导电炭黑天然橡胶正常使用的耗散功率不宜超过４Ｗ。
4) Power dissipation
功率耗散
1.
It was found that different transitions which were related with the electrical power dissipation took place in the course of increase in rf power and gas flow rate respectively.
发现在放电射频功率增加和反应气体流量升高的过程中 ,其等离子体状态分别发生性质不同的转变 ,这种转变联系到射频功率耗散机制的变化。
6) power dissipation map
功率耗散图
1.
The power dissipation map is developed on the basis of the flow stress data as a function of temperature,strain rate,and strain.
3Si合金绝热剪切和局部流动行为的影响,并采用基于动态材料模型的功率耗散图分析了Ti-6。
2.
The flow stress was corrected by the constitutive equation and the power dissipation map was obtained using the corrected stress.
由试验得出变形过程中的真应力真应变曲线,并利用本构方程对流变应力值进行修正,进而根据修正后的应力值绘制功率耗散图。
3.
A power dissipation map is developed on the basis of flow stress data and by using the principles of dynamic material model.
3Si合金进行等温恒应变速率压缩实验,分析高温流动行为,构建基于动态材料模型的功率耗散图,并结合微观组织观察对其β加工的动态再结晶行为进行研究。
补充资料：放射
放射
radiation
从某一点向四外射出。最普通的表现形式是光子按其发射的频率称为辐射波、光、X线、γ射线等。亚原子粒子，如电子、中子、质子、阻电子、介子，以及许多亚核离子也可被放射出来。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条