说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 弹性挠曲变形
1)  elastic springing
弹性挠曲变形
2)  elastic deflection exponent
弹性挠曲变形指数
3)  elastic deflection
弹性挠曲
4)  deflection [英][dɪ'flekʃn]  [美][dɪ'flɛkʃən]
挠曲变形
1.
Study on Deflection of Impression Cylinder and Active Compensation Method;
胶印机压印滚筒挠曲变形分析及主动补偿方法研究
2.
Considering the preliminary curvature, the deflection of casing string in curved segment of the well is analyze.
在考虑弯曲的条件下利用力法对弯曲井段中套管柱的挠曲变形进行了分析计算,推导出了相应的计算公式,其结论对工程实际有一定的指导意义。
3.
We present a method for computing annular slice deflection.
提出环形阀片受相关载荷作用时挠曲变形量的一种研究方法。
5)  deflection deform
挠曲变形
1.
Directed at the poor product use resulting from machine wear and tear caused by the vibration due to the dynamic unbalance of high-speed flexible rotor rotation,the paper introduces the use of dynamic balance by balanced mechanics principle to deal with free vibration of flexible rotor,deflection deform,educe the dynamic balance condition and realize method about flexible rotor.
研究表明:一根理想平衡的柔性转子,高速旋转时不仅作用在轴承上的动载荷为零,而且转子本身的动挠曲变形也为零。
6)  flexure deformation
挠曲变形
1.
In order to eliminate the effect of gyros drift and IMU installing error and ship flexure deformation on the accuracy of initial alignment,the extended Kalman filter and velocity-plus-angular rate matching method are applied to estimate and compensate these errors in this paper.
为尽可能消除惯性测量组件(IMU)安装误差及挠曲变形对初始对准精度的影响,运用传递对准技术,建立系统方程和量测方程,采用扩展状态滤波器和速度加角速率匹配的方法,准确地估计出了这些误差,并对系统进行补偿。
2.
In this paper, a calculation method of affections caused by shear forces to the flexure deformation of a simple supported toothed beam was carried out from the formula of general displacements calculating.
根据广义位移计算的一般公式导出剪力对齿状简支梁挠曲变形影响的计算方法,根据对梁的齿数、齿形、齿高、高跨比及荷载类型等影响剪力与弯矩引起的变形比的主要因数之分析和与等截面矩形梁的比较,得出一个简便的计算方法和几条有用的结论。
3.
The H∞filtering is introduced to deal with the velocity matching error,which is caused by the uncertainty of lever-arm size in the condition of long lever-arm size and severe flexure deformation.
仿真结果表明,在杆臂长度存在挠曲变形时,采用H∞滤波可以有效提高传递对准的精度。
补充资料:弹性
分子式:
CAS号:

性质:除去导致变形的负荷以后,材料迅速回复其原来尺寸和形状的能力。当变形与所加负荷成正比时,该材料被认为是虎克弹性体或理想弹性体。应力和应变不满足线性关系,但仍保持单值关系称非线弹性。加载后经过一定时间后应力和应变才满足线性关系称滞弹性。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条