1) gas flame brazing
气焰钎焊
2) gas brazing
气体火焰硬钎焊
3) torch brazing
火焰钎焊
1.
Application of oxy acetylene torch brazing in LF21 Al alloy;
氧—乙炔火焰钎焊在LF 21铝合金上的应用
2.
Under torch brazing condition, using brazing filler metals of Cu-based and Ag-based, a series of tests are investigated to braze Ti(C,N) based cermets and 45 steel, the micrographic structure of joints and shearing test results are analyzed, they show that Ti(C,N) based cermets has good brazability.
在火焰钎焊条件下 ,采用铜基、银基钎料对 Ti(C,N)基金属陶瓷与 4 5号钢进行钎焊试验。
3.
A trundled multi-station torch brazing machine is researched and developed for applying to the brazing of hydraulic accumulator in compressor .
研究开发了转盘式多工位自动火焰钎焊机 ,适用于压缩机储液器的大批量钎焊生产。
4) flame brazing
火焰钎焊
1.
By experimentation,comparison flame brazing's some limitations such as infiltration,working efficiency,working condition are poor and easy to burn out loop's insulating.
通过实验比较,阐述了气体火焰钎焊在焊接转子并头套时渗透率不高,生产效率低,生产环境差和容易烧坏线圈上的绝缘层等缺陷。
2.
The flame brazing technology for joining Al/Cu tube at middle-range temperature is realized.
采用火焰钎焊技术 ,实现了Al/Cu管异种材料的中温钎焊连接。
3.
By the measures of flame brazing,welding problems on aluminium alloy(LF6)and austenitic stainless steel(1Cr18Ni9Ti)are researched.
通过火焰钎焊的方法,实现铝合金(LF6)与奥氏体不锈钢(1Cr18Ni9Ti)的焊接。
5) brazing atmospheres
钎焊气氛
1.
The effects of brazing atmospheres on the as-brazed NiCr brazing alloy composite structures and interfacial microstructure are studied between diamond grits and brazing alloy.
运用扫描电镜(SEM)、X-射线能谱仪(EDS)和X-射线衍射结构研究了不同钎焊气氛对NiCr合金钎料成分和金刚石磨粒与钎料界面微观结构的影响。
6) electric soldering
电气钎焊
补充资料：硬钎焊
分子式：
分子量：
CAS号：
性质：见钎焊。
分子量：
CAS号：
性质：见钎焊。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条