1.
Torch-Brazing of T2 Copper with 1Cr17Ni2 Stainless Steel
T2紫铜与1Cr17Ni2不锈钢火焰钎焊焊接工艺技术研究
2.
a hot flame will make the solder run.
热的火焰使焊料融化
3.
Testing techniques of brazing and diffusion welding quality of liquid rocket engine
液体火箭发动机钎焊、扩散焊质量检测技术研究
4.
We provide professional: Vacuum drying oven, Vacuum drying oven; laboratory incubators laboratory, laboratory incubators; Sterilizers, Sterilizers; Sterilizing EquipmentSterilizing Equipment; Water baths, Water baths.
合一钎焊炉公司专业提供钎焊炉设备及连续退火炉;不锈钢退火炉,真空退火炉.
5.
Study of the Obdurability of 20CrMnTi Cutting Picks Treated by Lye Quenching after Hard Soldering
20CrMnTi截齿齿体钎焊余热碱液淬火强韧性研究
6.
Effect of annealing process on sagging resistance ability of brazing aluminium foil
退火工艺对钎焊铝箔抗下垂能力的影响
7.
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
8.
Effect of Flame Normalizing and Induction Normalizing on Properties of U71Mn Rail Joint After Flash Welding
U71Mn钢轨闪光焊焊后火焰正火与感应正火接头性能对比
9.
Keep flame away from rod or wire as it is fed into the joint. Move flame back and forth as alloy is drawn into joint.
当焊杆或焊线进入连接处时要将火焰从其上面移开。当合金流进连接处时,要前后移动火焰。
10.
Study on Wear Resistance of Tillage Stubble Machine Chopper with Flame Powder Spraying and Welding;
根茬还田刀具火焰喷焊耐磨性强化研究
11.
Technical innovation of flame adjusting of car-body welding deformation of aluminum alloy;
铝合金车体焊接变形火焰调修技术创新
12.
The Application of Flame Spray Welding Technology in CSP Running Table
火焰热喷焊技术在CSP输送辊道上的应用
13.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
14.
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
15.
Prevent sparks or flames from welding or cutting torches or any other source coming in contact with cylinders.
防止火花、自焊接或切割以及其它源头的火焰接触到钢瓶。
16.
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
17.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
18.
The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;
非晶Cu-P钎料的性能及钎焊机理研究