1) bulging and deflection
凸鼓变形
2) Loin-drum Deformation
鼓凸变形
3) drum cam
鼓形凸轮
1.
Based on the analysis of the rotation of cosine drum cam,this paper introduces a special de- vice to mill this type of cam on the ordinary horizontal milling machine.
通过对余弦鼓形凸轮运动特征的分析,介绍了在普通卧式铣床上利用分度头和回转工作台拼装的铣余弦鼓形凸轮形面的工装,实践证明,可保证较好的加工质量。
4) bulging deformation
鼓胀变形
1.
Bulging Deformation Analysis and Safety Assessment of Coking Tower;
焦炭塔鼓胀变形分析与安全评定
2.
The skirt from bottom to top of the tower was changed,and a nip convention out ektexine of coke tower was added to change the accepting force with coke tower in order to avoid the bulging deformation and cold crack with welding line below the coke tower.
将炼油行业传统焦炭塔的下裙座支撑改为上裙座支撑,在焦炭塔外壁增加一夹套,改变了焦炭塔的受力,避免了塔体下部鼓胀变形和焊缝冷裂纹的产生。
3.
In slashing running conditions,the bulging deformation of coke drums may appear after some years.
在苛刻的作业工况下,焦炭塔运行若干年后会出现筒体鼓胀变形。
5) Bulging up bottom board to be out of shape
底鼓变形
6) drum deformation
鼓胀变形
1.
There ′re many factors that influence the result of compression test for cast iron, among which the internal friction of material and the drum deformation of sample are most important.
影响铸铁压缩试验结果的因素很多 ,其中最主要的是材料内摩擦力及试件的鼓胀变形。
2.
After many years run, the drum deformation and cucurbit deformation appear.
一个生产周期为48小时，使焦炭塔经历了循环的升温、降温，整个塔体在室温与480℃之间循环变化，致使焦炭塔在运行若干年后出现塔体鼓胀变形和葫芦状变形。
补充资料：鼓凸
1.凸起。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条