1) secondary plasticizer(-iser)
助增塑剂
2) co-plasticizer
辅助增塑剂
3) secondary plasticizer
助增塑剂;次级增塑剂
4) plastics additives
塑料助剂
1.
The general situation include productivty,output and demand for plastics additives business in China at present was introduced.
介绍了目前我国塑料助剂生产能力、产量和需求等行业的总体状况,重点评述3种主要塑料助剂(增塑剂、热稳定剂、阻燃剂)的现状及前景,并提出了行业发展的一些建议。
2.
The granulated technology used in plastics additives industry is introduced.
通过对塑料助剂行业造粒成型技术的介绍 ,进一步说明粉状助剂产品粒状化已成为发展趋势 ;也是使助剂生产企业提高产品质量、扩大市场销路、甚至进入国际市场的一个必不可少的条件。
5) plastics additive
塑料助剂
1.
A brief introduction about situation and development trend of China’s plastics additives industry, including rapid increasing rate and huge impact from environmental protection was made.
简要介绍我国塑料助剂行业的发展现状及趋势,即增长速度加快和环保压力加大,因此应调整产品结构、加快新产品的研发工作。
2.
The impact resistance modifying agents and processing assistants among plastics additives were introduced, which including acrylate copolymers (ACR), chlorinated polyethylene (CPE) and methyl methacrylate-butadiene-styrene copolymers (MBS) etc.
介绍了塑料助剂中的抗冲击改性剂和加工助剂,其主要品种包括丙烯酸酯类共聚物(ACR)、氯化聚乙烯(CPE)和甲基丙烯酸甲酯-丁二烯-苯乙烯共聚物(MBS)等,并分别对其市场现状进行了分析。
3.
The auxiliaries such as nucleating agent,antistatic agent,coupling agent,colouring matter and antiseptic agent among plastics additives were introduced.
介绍塑料助剂中的成核剂、抗静电剂、偶联剂、着色剂和抗菌剂等,概述了成核剂的分类、品种、特征及其主要生产厂家,抗静电剂的种类、发展方向及其主要应用情况。
6) Plastic additive
塑料助剂
1.
The production situation and research progress of plastic additives in China were reviewed,which includ- ed plasticizer,nucleating agent,flame retardant,antioxidant,heat stabilizer,photo stabilizer,impact modifier,coupling agent,antimicrobial and so on.
综述了我国塑料助剂的生产现状和新产品研发进展,包括增塑剂、成核剂、阻燃剂、抗氧剂、热稳定剂、光稳定剂、冲击改性剂、偶联剂、抗菌剂和加工助剂等。
补充资料：辅助增塑剂
分子式：
CAS号：
性质：相对于主增塑剂而言，与树脂的相容性较差，用量超过一定浓度时出现渗出和使用制品发黏现象。一般不能单独使用，但与适当的主增塑剂配合可降低成本或提高制品的耐候性、低温性、电绝缘性等。如环氧大豆油、氯化石蜡、脂肪族二元羧酸酯等。
CAS号：
性质：相对于主增塑剂而言，与树脂的相容性较差，用量超过一定浓度时出现渗出和使用制品发黏现象。一般不能单独使用，但与适当的主增塑剂配合可降低成本或提高制品的耐候性、低温性、电绝缘性等。如环氧大豆油、氯化石蜡、脂肪族二元羧酸酯等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条