1) plasticizer A
增塑剂A
1.
Melt technology,a new way for the preparation of plasticizer A is introduced in this paper,including manufactory processes and conditions.
介绍了橡胶增塑剂A的生产新工艺——熔融合成法,论述了工艺过程、工艺条件。
2) workability agent
增塑[塑化]剂
3) plasticizer
[英]['plæstisaizə] [美]['plæstə,saɪzɚ]
增塑剂
1.
Developments of environment-friendly plasticizers of poly(vinyl chloride);
聚氯乙烯环保型增塑剂的研究进展
2.
The simultaneous determination of many kinds of adipate plasticizers in PVC packaging films;
PVC包装膜中多种己二酸酯类增塑剂的同时测定
3.
Application of plasticizer FS-200 in tread of TBR tire;
增塑剂FS-200在载重子午线轮胎胎面胶中的应用
4) plasticizers
增塑剂
1.
Effects of plasticizers on physical properties of chitosan/glutin composite films;
增塑剂对壳聚糖—明胶复合膜物理性能的影响
2.
Studies on migration of phthalate plasticizers in PVC plastics in human body fluid;
PVC塑料中邻苯二甲酸酯类增塑剂在体液中的迁移行为研究
3.
Determination of plasticizers in water by headspace solid-phase microextraction coupled with gas chromatogrphy;
顶空固相微萃取气相色谱法测定水中多种增塑剂
5) plastifier
增塑剂
1.
Effect of plastifiers on properties of siloxane end-capped polyurethane sealant;
增塑剂对硅烷化聚氨酯密封胶性能的影响
2.
Selection of matrix resin,plastifier,additive with high electric property and stabilizer-lubricant system,and their influences on plastic property are discussed.
在对基体树脂、增塑剂、高电性助剂、稳定 /润滑体系的选用及其对塑料性能的影响进行了探讨之后 ,确定了该绝缘塑料的配方 (质量份 ) :PVC(SG2或SG3) 10 0、增塑剂 4 0～ 50、稳定 /润滑体系 4～ 6、高电性助剂 5～ 10。
6) plasticizing agent
增塑剂
1.
Research on reducing the migration rate of the plasticizing agent in architectural membrane materials
降低建筑膜材增塑剂迁移率的研究
2.
And the varieties,the development situation and technology progress on new kinds of rubber auxiliaries are introduced in detail,including vulcanized agent,anti-scorching agent,anti-aging agent,coupling agent and plasticizing agent etc.
简述了国内外橡胶助剂的生产现状,详细介绍橡胶助剂的品种和新品种的开发现状和技术进展,包括硫化剂、防焦剂、防老剂、偶联剂和增塑剂等。
3.
The PES resin is demestic with some kinds of plasticizing agents added.
采用国产聚醚砜(PES)树脂为原料,添加不同的增塑剂,在不同的实验条件下进行熔融法纺丝实验,并对其热性能、流变性、可纺性及纤维的力学性能进行了研究。
补充资料：0259 增塑剂
分子式：
分子量：
CAS号：
性质：又称C5-9脂肪酸乙二醇双酯。淡黄色透明油状液体。相对密度0.945±0.005。沸程190~260℃（667帕）。闪点182℃，聚氯乙烯用辅助增塑剂，与邻苯二甲酸并用可改善制品的耐寒性。由石蜡氧化所得C5-9混合脂肪酸与乙二醇在硫酸催化下直接酯化，再经脱醇、中和、水洗、脱水、压滤得成品。
分子量：
CAS号：
性质：又称C5-9脂肪酸乙二醇双酯。淡黄色透明油状液体。相对密度0.945±0.005。沸程190~260℃（667帕）。闪点182℃，聚氯乙烯用辅助增塑剂，与邻苯二甲酸并用可改善制品的耐寒性。由石蜡氧化所得C5-9混合脂肪酸与乙二醇在硫酸催化下直接酯化，再经脱醇、中和、水洗、脱水、压滤得成品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条