1) coal cleaning plant
选煤厂 CCP
2) CCP point
CCP点
3) anti-cyclic citrullinated peptide antibody
抗CCP抗体
1.
Significances of anti-cyclic citrullinated peptide antibody and anti-Sa antibody in senile patients with rheumatoid arthritis;
抗CCP抗体和抗Sa抗体联合检测对老年人RA的临床意义
2.
Objective To explore the significance of anti-cyclic citrullinated peptide antibody in diagnosing rheumatoid arthritis.
方法用ELISA法及速率放射免疫比浊法分别检测RA及非RA患者血清中的抗CCP抗体和RF,比较抗CCP抗体及RF对RA诊断的敏感性、特异性及早期RA诊断预测性方面的差异。
3.
Objective To investigate effects of Yishen Juanbi Pill on the level of anti-cyclic citrullinated peptide antibody(CCP)and anti-keratin antibody(AKA),the features of clinical manifestation and articular damage in patients with early rheumatoid arthritis(RA)in order to provide evidence for the treatment of early RA.
目的探讨益肾蠲痹丸对早期类风湿性关节炎(RA)患者抗CCP抗体、AKA抗体、临床指标、关节损害程度等的影响,为其治疗早期RA提供可靠的实验依据。
4) CCP Protocol
CCP协议
1.
Based on CAN bus and CCP protocol,and using CANape as the software of its master machine,a calibration system for ECU products of electronically-controlled diesel engine is developed.
基于CAN总线,采用CCP协议,使用商业化标定软件CANape作为标定系统的上位机软件,针对电控柴油机产品ECU开发了一套标定系统。
2.
The principle and communication method of CCP protocol and the various working modes of ECU′s calibration were introduced,and the design method of calibration system based on CPP protocol on automobile electronic control unit was discussed.
介绍了CCP协议的基本原理、通信方式以及用于ECU标定的各种工作模式,讨论了一种基于该协议的汽车电控单元标定系统的设计方法。
3.
The rational calibration for the parameter on HEV battery management system can optimize entire vehicle control tactics This paper instroduced a calibration system which based on CCP protocol,do calibration to the parameter on HEV battery managemen system,integrated CCP driver in BMS source program,use INCA software realized the calibration on BMS,optimize the performance o vehicle.
本文介绍了一种基于CCP协议,对HEV蓄电池管理系统各种参数进行标定的系统,在BMS源程序中开发集成了CCP的驱动程序,利用INCA软件实现了对BMS的标定,优化了整车的性能。
5) CCP
CCP协议
1.
Development of Hybrid Electric Vehicle ECU Calibration System Based on CCP;
基于CCP协议的HEV用ECU标定系统设计
2.
Calibration of HEV Vehicle Control Unit Based on CCP;
基于CCP协议标定混合动力车整车控制器
3.
ABS Calibration System Based on CCP
基于CCP协议的ABS标定系统
6) CCP Module
CCP模块
补充资料：闭式单点、双点压力机
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
（一）加工精度 | 参照GB10924-89、GB10933-89、JB5200-91 | ||||||
1、滑块下平面对工作台上平面的平行度（mm） | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.02+0.10/100×滑块下平面的被测长度 | |||||||
2、滑块行程对工作台上平面的垂直度 | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.05+0.02/100×滑块行程长度 | |||||||
（二）结构性能 | |||||||
1、离合器、制动器接通率，当滑块行程次数≤16次/分时为70%，≤25次/分时为60%，≤45次/分时为50% | 大于规定值10% | 大于规定值 | 达到规定值 | 达不到规定值 | |||
2、液压超负荷保险装置、微调装置、吨位指示器 | 全部具有 | 全部具有 | 部分具有 | 没有 | |||
（三）噪声dB（A） | |||||||
1、公称力≤400kN | ≤85 | ≤87 | ≤88 | ＞88 | |||
2、公称力＞400kN | ≤87 | ≤88 | ≤90 | ＞90 | |||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条