1) undue deviation
过大跑偏
2) maximum offset signal
最大跑偏信号
3) running deviation
跑偏
1.
This paper analyzes the running deviation of conveyor belt,puts forward precautionary measures of running deviation under different situation,studies on corrective measures,self-corrective measures and its principle in de.
输送带跑偏是带式输送机运行中最常见的故障,严重影响设备的寿命及生产。
2.
In aluminium strip hot rolling process,because the landscape orientation parameters of the workpiece and the rolling mill are not even,there is always departure between the center line of the workpiece and the assumed center line,which is called running deviation.
铝带热连轧过程中,铝带和轧机横向特性参数不均易引起铝带中心线偏离轧制系统设定中心线,产生跑偏现象。
3.
This paper introduces the reasons of belt coveryor's belt running deviation,and some methods to adjust deviation.
介绍带式输送机输送带跑偏的原因 ,以及调偏的一些方法。
4) deviation
[英][,di:vi'eɪʃn] [美]['divɪ'eʃən]
跑偏
1.
Intelligent control system for edge position deviation of narrow fabrics;
矫正织物蛇行跑偏运动的智能纠偏系统
2.
The automatic system of conveyer belt deviation;
带式输送机跑偏自动校正系统
3.
The measures analysis of occurring deviation while installing prevention embryonic plate of heating-furnace;
加热炉炉底机械安装预防板坯跑偏措施分析
5) rolling deviation
跑偏
1.
Rearch for rolling deviation value in unsymmetrical plate/strip rolling;
非对称情况下板带轧制跑偏的研究
2.
At the same time,rolling deviation is used.
板形理论中条元法的计算精度在很大程度上依赖于金属出口横向位移函数的初值,在非对称情况下采用以往研究中使用对称情况下的初值会有一定误差,为此以非对称函数拟合带材入、出口处横向厚度分布,同时引入跑偏概念,利用最小能量原理,由欧拉微分方程求得非对称情况下出口处金属横向位移函数,并计算了前张应力的横向分布,计算结果符合试验规律。
6) Off tracking
跑偏
1.
Off tracking is an important factor in the quality of roll-forming products.
不对称结构板料跑偏是影响辊压成型产品质量的一个主要因素。
补充资料：偏信
1.相信一方。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条