1) pressure spindle
压力轴
2) axial pressure
轴向压力
1.
Plastic deformation and strengthened phenomenon of some areas of circular saw exerted axial pressure on;
圆锯片局部受轴向压力作用下的塑性变形及强化
2.
Experimental research on wave velocity under axial pressure;
轴向压力下砂岩波速的实验研究
3.
This paper carried out the analysis and testing of axial pressure distribution of V seal in theoretically and experimentally,and explored two problems in the failure and the ring number of V seal through distribution curves of the axial pressure.
文章对压裂泵液力端V形密封轴向压力分布从理论和试验两方面进行分析和测试,并由轴向压力分布曲线探讨了V形密封失效和圈数确定的问题。
3) Axial compressive force
轴向压力
1.
The effects that axial compressive forces produce on the bending deformation of beam-columns are analyzed using differentiating equations about elastic deformation of beam-columns.
利用压弯构件的弹性曲线微分方程,分析了轴向压力对压弯构件弯曲变形的影响,导出了各种压弯构件附加弯矩的统一算式。
4) shaft seal pressure
轴封压力
5) shaft end pressure
轴端压力
6) axial load
轴向压力
1.
Investigation on the strain sensitivity of steel slag concrete under axial load;
轴向压力作用下钢渣混凝土的压敏性研究
2.
Failure mode and limit bearing capacity of the joints are acquired,and effects of the ratios of brace to chord width,chord axial load to yield load, and the brace position and spatial action on joint strength are studied.
对6个K型和7个KK型直接焊接方管节点进行了在弦杆轴向压力作用下的静力试验研究。
补充资料：单轴各向异性
单轴各向异性是磁晶各向异性的最简单形式，即自发磁化的稳定方向（或易磁化方向）平行于一特殊晶轴。如六方晶系钴的自发磁化方向平行于 C轴(见晶体结构)，这就表现出强的单轴各向异性。磁性材料的单轴各向异性值一般都低于其磁晶各向异性值，为103erg/cm3量级。磁性材料经磁场热处理或强的冷加工而产生的感生各向异性，都属于单轴各向异性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条