1) Dump test
压丹试验
2) Dennis-Silverman test
丹-西氏试验
3) repeating press test
压压试验
1.
A impact tester and a repeating press tester have been used to evaluate the mechanical properties of the multilayer.
采用磁控溅射技术在TC4钛合金表面制备Cu/Ni多层膜,利用多冲和动态循环压压试验装置对膜层的力学性能进行了评价,探讨了冲击条件、多层膜调制周期及结构等对多层膜失效行为的影响,比较了多层膜和单层Cu、Ni膜在多冲条件下的失效行为,以及多冲与循环压压载荷对多层膜失效行为的影响。
4) compression test
压缩试验
1.
A compression test and recrystallization simulation test of 41Cr4 steel(medium carbon and low alloy steel)had been performed by GLEEBLE 3500 subject to large strain and high temperature, then the volume fraction of recrystallization and true-stress and true -strain was obtained.
8)条件下,在Gleeble-3500试验机上进行了41Cr4钢的压缩试验和再结晶模拟试验,测得了再结晶体积百分数及真应力和真应变。
2.
In order to establish accurate constitutive equations for hot workings of metals, a large number of constant strain-rate compression tests have been done on thermal-mechanical testing machines (Gleeble-1500 and Formaster-press) using TC11 titanium alloy as testing materials.
为了建立本构方程，必须测量一定温度、应变速率范围内的流动应力值，这通常是由压缩试验来完成的。
5) Hydraulic test
水压试验
1.
Practical experience of the main primary system hydraulic tests for Qinshan NPP Phase Ⅱ;
秦山第二核电厂一回路主系统水压试验实践经验
2.
FEM calculation and hydraulic test of NF-6 wind tunnel;
NF-6风洞洞体有限元计算与水压试验
3.
The hydraulic test unit for large-diameter gate valves;
大口径平板闸阀的水压试验装置
6) hydrostatic test
水压试验
1.
Differences between chinese standards and ASME code for hydrostatic test of utility boiler;
国内外电站锅炉水压试验标准的差异
2.
Effect of hydrostatic test on material properties of air cylinder for metro vehicle
水压试验对地铁车辆储风缸材料性能的影响
3.
Furthermore,the experimental stress analysis of the case is also accomplished using the hydrostatic test.
通过水压试验对箱体进行试验应力分析,验证了箱体有限元模型及计算的正确性,为研究箱体提供了可靠的数据和技术储备。
补充资料：压压
1.密集貌;盈满貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条