1) test pressure
试验压力
1.
Discussion on vessel flange intensity under the test pressure;
试验压力下容器法兰强度的探讨
2.
In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied.
应用可靠性设计方法 ,对超高压圆筒耐压试验压力进行探讨 ,定量分析试验压力与影响因素之间的关系。
3.
It analyses stress sustained by pipe during hydrostatic test and briefly introduces calculation formula deduced process of test pressures.
分析了静水压试验过程中钢管的受力情况,简要介绍了试验压力计算公式的推导过程。
2) testing pressure
试验压力
1.
From viewing angle of fuzzy reliability range for controlling the stability of steel thin-wall external pressure vessels,the buckling safety factor(stability factor),testing pressure coefficient and overpressure confining coefficient were quantitatively analyzed during normal operation and under external pressure test.
为了控制钢制薄壁外压容器的稳定性,建立了以分布参数为区间界限限定时的随机概率模型,从外压压力试验和正常操作时模糊可靠度范围的角度,对薄壁外压容器的稳定系数、试验压力系数和超压限制系数进行了探索。
3) pressure test
压力试验
1.
Field pressure test of submarine pipeline system;
海底管道系统的压力试验
2.
Fuzzy Reliability of the Static Strength of the Thin-Wall Internal Pressure Cylinders at Pressure Tests;
压力试验时薄壁内压圆筒静强度的模糊可靠度
3.
Reliability analysis of steel thin wall cylinder during pressure test;
压力试验时钢制薄壁内压圆筒形容器可靠性
4) pressure experiment
压力试验
1.
This paper introduces the experiment condition of pressure experiment for water supplying pipeline of glass steel,experiment technology and method.
介绍了玻璃钢供水管道现场压力试验的试验条件,试验工艺及试验方法,供同行参考。
5) pressure testing
压力试验
1.
According to GB150-98 steel pressure vessel, it is proved that the horizontal cylinder under internal pressure needs no pressure testing for stress checking .
以 GB1 50 - 98钢制压力容器为依据 ,推导证明了卧式内压圆筒形容器可以免去压力试验下筒壁薄膜应力校核。
2.
Because the single heat exchange tube has little volume, welding in series is always applied in pressure testing,but the impacting pressure will take place too.
单根换热管因为容积小 ,压力试验时常采用串联焊接后试压的方法施工 ,且试验过程中易产生压力冲击 ,通过分析压力试验的实施过程 ,采用千斤顶密封装置和压力平衡装置以替代串联焊接和缓解压力冲击 ,确保了单根换热管的压力试验方便和安
3.
Pressure vessels must make pressure testing before they are taken part into practice.
压力容器在进行压力试验时,须先对在试验压力作用下的强度进行理论校核,合格后才能进行实际操作。
6) compression testing machine
压力试验机
1.
Study on application of MSA in precision inspection of compression testing machine;
MSA在压力试验机精度检测中的应用研究
2.
The Computer controlled constant stress hydraulic system was designed for 300kN cement compression testing machine which used to testing cement's compressive strength and it was controlled by a digital controlled micro-flow Valve and loading at a constant stress rate.
300kN恒加荷压力试验机是水泥等生产企业和质检部门的重要计量检测设备,主要用于水泥抗压强度的检测。
3.
We designed a test system of compression testing machine based on LabVIEW.
采用LabVIEW图形化的编程语言设计了压力试验机测试系统。
补充资料：试验压力
分子式：
CAS号：
性质：容器制造完成或检修完成之后，应进行液压（或气压、致密性等）试验。而其所采用的压力值称为试验压力。试验压力值的大小，按图纸规定。
CAS号：
性质：容器制造完成或检修完成之后，应进行液压（或气压、致密性等）试验。而其所采用的压力值称为试验压力。试验压力值的大小，按图纸规定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条