说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 准解理断口
1)  quasi-cleavage fracture
准解理断口
2)  hydrogen-embrittlement induced
氢致准解理断口
3)  cleavage fracture
解理断口
1.
And with the increasing of temperature,fracture mode varied significantly from cleavage fracture to ductile fracture.
5 %Si Fe热轧合金的层状组织消除 ;其断裂模式随拉伸温度的升高迅速由解理断裂向韧性断裂转变 ;在 2 0 0℃拉伸时 ,为纯解理断口 ,此时该合金即具有高达 2 6 %的延伸率 ;但是在 2 0 0℃ - 40 0℃温区 ,延伸率未随温度的升高而显著增大 ,其断口形貌为解理 +韧窝的混合断口 ;在 5 0 0℃拉伸时 ,为纯韧窝断口 ,其延伸率可达 43
2.
The cleavage fracture surfaces of Ti_3Al and Ti-24Al-11Nb samples after tensile tests in air were studied with a scanning tunnel microscope(STM).
采用隧道扫描显微镜(STM)对Ti3Al及Ti-24Al-11Nb试样在空气中拉伸的解理断口进行了研究。
4)  quasi-cleavage fracture
准解理断裂
1.
Results showed that pure molybdenum plate with the fibrous microstructures possessed a good quality of ductility,and its fracture be-havior was quasi-cleavage fracture.
结果表明:纤维状组织的高纯钼板具有良好的室温韧性,其断裂表现为准解理断裂;若经过回复和再结晶,纤维组织转化成等轴晶粒组织,则材料呈现脆性,其断裂表现为穿晶解理断裂和沿晶脆性断裂的混合型断裂。
2.
According to literature,we have done the analysis to the process of the crack s blunt crack and stress spreads on the symmetrical axle combining with the slip linear field theory of blunt cutting edges in the plasticity mechanics and indicated the relationship between the condition of quasi-cleavage fracture K_(1c) and basic mechan.
利用相关文献的结果,结合塑性力学中钝切口的滑移线场理论,对于裂纹的钝化过程及其对称轴上的应力分布做了近似分析,导出了准解理断裂情况K1c与材料的基本力学性能之间的关系。
3.
Brittle zone was cleavage fracture,tough-brittle zone was quasi-cleavage fracture.
脆性区为解理断裂,韧脆混合区为准解理断裂。
5)  quasi-cleavage brittle fracture
准解理脆性断裂
6)  cleavage fracture
劈裂,解理断口
补充资料:解理
分子式:
分子量:
CAS号:

性质:又称劈开。矿物晶体受外力作用沿一定方向裂开在光滑面的性质。解理的难易,决定于晶体的内部结构。一般可将解理的完善程度分为五级:(1)极完全解理。解理面很平滑,裂成层片很薄,极不容易发生断口。例如云母。(2)完全解理。解理面常平滑,往往可沿解理而裂开成外形与原来晶形相像的小块,不容易发生断口。例如方解石。(3)中等解理。在碎块上可看到解理面和不定方向的断口。例如正长石。(4)不完全解理。碎块中可看到解理面,但比较困难。断口常是不平整的表面。例如磷灰石。(5)极不完全解理。碎块表现出断口。实际上没有解理,只在偶然的场合才能发现解理。例如石英。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条