1) proportional intensification
比例加厚
2) Proportional loading
比例加载
1.
Multiaxial fatigue behavior of superalloy GH4169 was investigated by using the thin tubular multiaxial fatigue specimens under proportional and non-proportional loadings at high temperature.
高温多轴疲劳试验采用比例与非比例加载路径。
2.
Biaxial fatigue behaviors of the Zr-4 alloy under proportional and non-proportional loading with the phase angles of 30°, 60° and 90° were studied.
研究了冷变形Zr-4合金在双轴比例和非比例加载下的循环变形行为,结果表明:当循环应变幅较低时,Zr-4合金表现为循环初始硬化随后饱和的特征;随着应变幅提高,初期硬化后,表现为连续循环软化特征;高应变幅下,初期硬化消失,表现为急剧的循环软化。
3.
The deformation behavior of hydrided zircaloy-4 under tension-torsion proportional loading was investigated using the quantitative metallography and the finite element method(FEM).
采用有限元数值分析方法,模拟了含氢化物Zr-4合金拉-扭双轴比例加载下的变形行为。
3) additional proportion
加入比例
4) adding proportion
填加比例
5) grit dosage
加砂比例
1.
By way of study on selection of various curing agents for epoxyresins and regulation of grit dosage, factors influencing intensity of epoxy mortar were discussed, appropriate materials andgrit dosage determined .
本文通过各种环氧树脂固化剂的选择和加砂比例的调节,讨论了影响环氧砂浆强度的各种因素,确定了合适的环氧砂浆施工材料和加砂比例。
6) appending proportion
添加比例
1.
Continual extraction process was used to study the concentration and form changes of heavy metals in aerobic high temperature compositing of pig manure,and the effects of heavy mental passivation appending proportion on heavy metal concentration and form.
采用连续提取法研究猪粪好氧堆肥处理中重金属浓度和形态的变化以及不同添加比例的重金属钝化剂对其浓度和形态的影响。
补充资料：自动加载下载的*.dmt材质方法
自动加载下载的*.dmt材质方法一
1、建立如下路径的文件夹：
E:\graphiclib\graphic-library\
然后把你下载的adv_materials文件夹（里面材质了）放到刚才建立的路径里，变成如下路径
E:\graphiclib\graphic-library\adv_materials
2、如图配制搜索路径
3、这样调用！点PHOTOLUX材质库
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条