1) elementary repeater section
单元增音段，单元中继段
2) elementary cable section (repeater section)
单元电缆段(中继段)
3) segment element
梁段单元
4) slab segment element
板段单元
1.
According to the structural characteristics of the ballastless track such as the Bgl slab track,a new dynamic analysis model of the lateral finite strip and slab segment element was put forward.
针对无碴轨道(以博格板式轨道为例)结构特点,提出横向有限条与板段单元动力分析新模型。
5) unit reach
单元河段
1.
The Main stream and tributaries above Cuntan Station were separated into many reaches according to the spread time of flow,and every reach is separated into many unit reaches.
按照河段流量传播时间将寸滩以上干、支流划分为若干子河段,各子河段按照计算时段长分成若干单元河段,各单元河段区间降雨径流预报采用水箱模型,河道流量演算采用连续马斯京根法。
2.
The main stream and tributaries above the inflow reservoir station Cuntan were divided into several sub-reaches according to the propagation time of flow,and the sub-reaches were divided into unit reaches according to the calculation time interval.
按照河段流量传播时间将入库站(寸滩)以上干、支流划分为若干子河段,各子河段按照计算时段长分成若干单元河段,各单元河段区间降雨径流预报采用水箱模型,河道流量演算采用连续马斯京根法。
6) Unit time period
单元时段
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条