1) flame-spraying
焰喷[法]
2) blast flame spraying,flame spraying
火焰喷涂法
3) detonation flame spraying
爆炸火焰喷涂法
4) burner blowing process,flame blowing process
火焰喷吹法<玻璃纤维>
5) flames spray-welding
火焰喷焊
1.
WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
2.
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
3.
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
6) flame spray fusion
火焰喷熔
1.
Improvement of fatigue strength of Q235 steel welded joint by modification of flame spray fusion;
火焰喷熔修形法提高Q235钢焊接接头疲劳性能的研究
补充资料：火焰喷涂
分子式：
CAS号：
性质： 将金属粉末或塑料粉末用火焰喷枪喷涂到物体表面的涂布方法。聚乙烯、尼龙、氟树脂和环氧树脂广泛采用。其过程是粉末材料与适当的助溶剂混合后，用压缩空气或惰性气体将其从贮料槽中吹出，在锥形火焰中被加热到熔融温度，并喷到经过净化处理及预热过的工件上，直至达到所需厚度为止。适用于现场施工。
CAS号：
性质： 将金属粉末或塑料粉末用火焰喷枪喷涂到物体表面的涂布方法。聚乙烯、尼龙、氟树脂和环氧树脂广泛采用。其过程是粉末材料与适当的助溶剂混合后，用压缩空气或惰性气体将其从贮料槽中吹出，在锥形火焰中被加热到熔融温度，并喷到经过净化处理及预热过的工件上，直至达到所需厚度为止。适用于现场施工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条