1) Flame gunning
火焰喷补
2) flames spray-welding
火焰喷焊
1.
WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
2.
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
3.
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
3) flame spray fusion
火焰喷熔
1.
Improvement of fatigue strength of Q235 steel welded joint by modification of flame spray fusion;
火焰喷熔修形法提高Q235钢焊接接头疲劳性能的研究
4) flame spraying
火焰喷涂
1.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
2.
Influence of spraying distance of ceramic soft wire flame spraying on properties of layer;
陶瓷软线材火焰喷涂距离对涂层性能的影响
3.
On the properties of nylon 1010/nanometer TiO_2 coatings by flame spraying;
火焰喷涂尼龙1010/纳米TiO_2复合涂层力学性能研究
5) flame spray-welding
火焰喷焊
1.
Ni60+WC clad layers on the 45 steel substrate were produced by l aser cladding and flame spray-welding,respectively.
分别采用激光熔覆与粉末火焰喷焊两种技术在45钢基体表面制备Ni60+20%WC合金涂层,比较其组织结构和性能。
6) flame spray
火焰喷涂
1.
TiC-TiB_2 multiphase ceramic coatings prepared by reactive flame spray;
TiC-TiB_2复相陶瓷涂层的反应火焰喷涂制备
2.
Polyamide 1010(PA1010)/nano-ZrO2 composite coating was prepared by flame sprayed.
利用火焰喷涂法制备了尼龙1010(PA1010)/n-ZrO2复合涂层,采用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
3.
Polyamide12(PA12) and PA12/nano-SiO_2 composite coatings were prepared by flame spray.
采用火焰喷涂法制备了聚酰胺12/纳米SiO2(PA12/nano-SiO2)复合涂层,利用差示扫描量热法(DSC)对复合涂层的非等温结晶过程、熔融行为进行了分析。
补充资料：激光喷码机与喷墨喷码机的比较
喷印的图案文字和数码主要包括生产日期、有效期、批号、条形码以及商标图案。防伪标记和中文字样等，是贯彻卫生法和促进包装现代化强有力的设备。
这种技术广泛应用于多行业，多材质表面，运行高速，稳定，适配各种车间，生产线工况的包装标刻。应用材质包括纸张、PVC、玻璃、塑料、橡胶、木材、陶瓷、皮革、布料等各种材质。应用对象目前主要分两大类，一类是产品的包装，主要分布在食品、饮料、烟草、酒类及医药行业：另一类是产品本身，即在产品上标注其规格型号等，使其成为产品本身的一部分内容，主要分布在电线电缆、建筑材料、电子产品和商务印刷等行业。
这种技术广泛应用于多行业，多材质表面，运行高速，稳定，适配各种车间，生产线工况的包装标刻。应用材质包括纸张、PVC、玻璃、塑料、橡胶、木材、陶瓷、皮革、布料等各种材质。应用对象目前主要分两大类，一类是产品的包装，主要分布在食品、饮料、烟草、酒类及医药行业：另一类是产品本身，即在产品上标注其规格型号等，使其成为产品本身的一部分内容，主要分布在电线电缆、建筑材料、电子产品和商务印刷等行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条