说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 砂模黑浆
1)  black wash
砂模黑浆
2)  Cement-carbon mortar
炭黑水泥砂浆
3)  black sand
黑砂
4)  cement mortar
砂浆
1.
Influence of bagasse magnesium lignosulfonate with relative different molecular weight on performance of cement mortar;
不同相对分子质量的蔗渣木质素磺酸镁对水泥砂浆性能的影响
2.
The effect of the content of silica fume on the structure and property of the cement mortar and property of the cement paste were investigated.
探讨不同掺量的硅灰对水泥净浆与砂浆性能及砂浆结构的影响。
3.
Effects of FDN and Calcium lignosulfonate(LS) on the properties of high-volume fly ash cement mortar were studied.
研究了萘系高效减水剂(FDN)和木质素磺酸钙(LS)对高掺量粉煤灰砂浆性能的影响,测定了减水剂在胶凝颗粒表面的吸附、对水泥颗粒表面zeta电位等方面的影响。
5)  Sand pulp
砂浆
1.
Study on fly ash as substitute material of concrete and sand pulp;
混凝土及砂浆合理掺用粉煤灰研究
6)  slurry [英]['slʌri]  [美]['slɝɪ]
砂浆
1.
Analysis of applying effects man-made sand in slurry and concrete;
人工砂在砂浆和混凝土中的应用效果分析
2.
In this article, the characteristics, application, construction proportion and physical and mechanical properties of the polymer slurry used in abroad were introduced, which can be referenced by engineers.
本文介绍国外聚合物砂浆的性质和应用、施工配比及物理机械性能 ,供设计人员参
3.
the primary factors influencing wafer warp(such as saw wire tension,times of slurry using and saw rate)were analyzed,the regular of warp distribution and the reasons of engendering warp were introduced.
通过对切割线张力、砂浆使用次数、切割速度等影响翘曲度的主要因素进行实验分析,阐述了产生的原因,并得出了翘曲度的分布规律。
补充资料:白炭黑补强
分子式:
CAS号:

性质:白炭黑在橡胶工业中主要用作优良的白色补强剂,能改善胶料的黏着力,赋予胶料较高的拉伸强度、伸长率、弹性、硬度、耐热性以及撕裂强度。其补强性能与它的粒径大小、表面性质、结构和在胶料中的分散性有关。它对橡胶的补强作用主要由两个方面的因素决定:(1)白炭黑微粒无定型状,结晶混乱,表面与橡胶大分子接触产生物理吸附;(2)白炭黑表面存在硅氧基、隔离羟基、氢链连接,尤其是白炭黑结构中心的—Si—O—键具有极性,能产生很强的结合能力,使白炭黑颗粒表面活性大,能与橡胶分子链形成牢固的化学键,达到补强效果。白炭黑与炭黑相比,比表面积更大,粒子更小,“结构性”更高,因而硫化胶拉伸强度、撕裂强度、耐磨性也高,但弹性下降,混炼胶的黏度增大。白炭黑常用于天然橡胶、丁苯橡胶、丁腈橡胶、氯丁橡胶、乙丙橡胶或它们的并用胶中作为补强填料。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条