1) peak value of humidity
湿度峰值
2) peak depth
峰值深度
1.
In order to increase the peak depth of nitrogen atoms during the nitrogen plasma ion implantation of Ti 6Al 4V alloy, the rare earth metal yttrium was used to increase the implantation and diffusion depth of nitrogen atoms.
为了提高氮等离子体浸没离子注入Ti 6Al 4V合金时氮原子的峰值深度 ,利用钇来增加氮在基体中的注入深度和扩散深度 ,先用 2 0kV的电压进行钇等离子体浸没离子注入处理 ,然后用 30kV的电压进行氮等离子体浸没离子注入处理。
3) peak viscosity
峰值粘度
1.
It showed that the RVA pasting curve(especially peak viscosity)revealed clearly the differences in quality of different samples.
研究表明,糊化特性曲线,尤其是峰值粘度,可以清晰地显示不同试样的品质差异。
4) peak intensity
峰值强度
1.
Purpose: In order to assess the angiogenesis of hepatocellular carcinoma, the peak intensity in contrast ultrasonography of the lesions was compared with the findings of immunohistochemistry.
目的:探讨肝细胞肝癌超声造影峰值强度与血管生成的相关性。
2.
Objective: To study the peak intensity in contrast ultrasonography of hepatocellular carcinoma and its relationship with angiogenesis and to provide a wound-less index for angiogenesis evaluation in clinic.
目的:探讨肝细胞肝癌超声造影峰值强度与血管生成的相关性,以期为临床提供无创性血管生成的评估指标。
3.
By numerical analysis method,influences of beam separation distance,characteristics of unit beam and array structure on far field peak intensity and beam quality of incoherent combination and the same phase coherent combination were researched.
建立了矩形阵列高斯光束合成模型,采用数值模拟方法计算了光束间距、单元光束特性以及阵列结构等参数对非相干合成和同相位相干合成的远场峰值强度及光束质量的影响,描述了非同相位相干合成可能产生的结果,讨论了同轴与非同轴合成,相干与非相干合成的特点。
5) peak strength
峰值强度
1.
Research results:Residual strength of slip soil has linear regression with peak strength;plastic index can be better used to estimate residual strength.
研究结果:滑带土的峰值强度和残余强度比较接近,成线性关系;塑性指数能较好的用来估算残余强度。
2.
A modified Ashby-Hallam model was used to calculate the peak strength of granite specimens containing flaws.
在分析Ashby和Hallam含缺陷脆性介质峰值强度理论模型基础上,对其进行修正,并用修正的理论模型研究单轴作用下,含裂纹缺陷花岗岩试样的裂纹萌生、扩展、贯通和相互作用等因素对峰值强度的影响规律。
3.
Joint was treated as quadrate elements of ideal plastic material beyond peak strength.
采用FLAC模拟了节理倾角对各向异性岩样峰值强度、力学行为及剪切带图案的影响。
6) peak velocity
峰值速度
1.
In this paper, a method, which synthesizes the artificial ground motion compatible with the specified peak velocity as well as the target acceleration response spectrum, was proposed.
提出一种以绝对加速度反应谱和峰值速度为目标的合成人造地震动时程的方法。
2.
The thesis contains two parts: First, the seismic response of structure is discussed under ground motion with same peak acceleration and spectrum of acceleration, and different peak velocity and peak displacement.
本文共完成两项工作:其一,探讨了具有相同加速度峰值和相同频谱特性但峰值速度和峰值位移不同的地震动对结构地震反应的影响。
补充资料：第二峰值法试验
分子式：
CAS号：
性质：一种检验不锈钢晶间腐蚀倾向的快速的电化学方法。对敏化的不锈钢试样在1mol/L H2SO4中测定阳极极化曲线，曲线上在比活化钝化峰更正的电位下出现第二峰，峰的高度可以表示晶间腐蚀倾向的大小。也可在第二峰值电位下保持2h，然后进行弯曲试验，根据试样的裂纹判断晶间腐蚀倾向。
CAS号：
性质：一种检验不锈钢晶间腐蚀倾向的快速的电化学方法。对敏化的不锈钢试样在1mol/L H2SO4中测定阳极极化曲线，曲线上在比活化钝化峰更正的电位下出现第二峰，峰的高度可以表示晶间腐蚀倾向的大小。也可在第二峰值电位下保持2h，然后进行弯曲试验，根据试样的裂纹判断晶间腐蚀倾向。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条