1)  non-load
空载,无载
2)  idling
空载,无载
3)  no load
空载
1.
Large quantity energy loss was induced by the power consumption of the no load exchange arc welding machine.
交流弧焊机空载时的耗电量造成了大量的能源损耗,介绍了自动节电装置的作用、工作原理及在生产中的可行性,在实践中取得了良好的节能效果。
2.
The 3 dimensional calculation and analysis on no load magnetic fields of a 35A claw pole alternator has been done in this paper.
该文通过三维电磁场数值分析方法对一台 35A交流汽车爪极发电机的空载磁场分布进行了计算 ,分析了电机各部分的磁场以及电机气隙磁密波形 ,对于不同爪极截面处也进行了计算和磁场显示 ;在此基础上 ,利用能量摄动法进一步研究和计算了空载时电机各绕组的自感和互感 ,从而得出了空载时的相电压波形 ;与实测结果比较 ,证明了计算结果的正确性 ,对于计算负载时爪极电机的电感以及进一步研究混合励磁的爪极电机均具有一定的参考价
4)  no-load
空载
1.
The No-load Electromagnetic Field Analysis of Permanent Magnetic Synchronous Generators with the Ansys soft;
ANSYS软件在永磁同步发电机空载磁场分析中的应用
2.
Identification of Engine No-load Model on thd Basis of Nerve Network;
基于神经网络的发动机空载模型辨识
3.
Analysis of Causes of Differential Protection Malfunction of Transformers with no-load Input;
变压器空载投入时差动保护误动作原因分析
5)  in ballast
空载
6)  light load
空载
7)  no-load test
空载试验
1.
Data Processing System of Induction Motor in No-Load Test;
感应电动机空载试验数据处理系统
2.
It also discusses the style for no-load test and short circuit test, so as to conclude the reasonable load selection for the optimum efficiency of transformer.
3 MVA电炉变压器特点进行剖析,并对空载试验及短路试验的方式进行探讨,求出变压器最佳效率的合理负载选择。
3.
The cause of over standard acetylene content in a SZZ-3150/40 on-load voltage regulator is found out by chromatogram analysis and no-load test.
对一台SZZ-3150/40型有载调压装置进行色谱分析及空载试验,找出该装置乙炔含量超标的原因。
8)  no-load running
空载运转
1.
This article introduces a device for no-load running test of main components of drilling rig.
新设计的石油钻机主要运动部件空载运转测试装置采取空载试车形式,以电动机为动力源,通过液力变矩器、变速箱变速后带动被测的钻机部件,可以对ZJ15、ZJ20、ZJ30、ZJ40等型号钻机的主要运动部件(包括绞车、钻井泵、转盘、水龙头)进行空载运转测试,对噪声、振动、温度等数据进行采集及分析,具有结构紧凑、操作安全、变速范围大、数据分析简便可靠等特点。
9)  idle power
空载功率
1.
The study of idle power on woodworking drill press (2);
木工钻床空载功率的研究(2)
2.
The study of idle power on woodworking drill press (3);
木工钻床空载功率的研究(3)
3.
The relationship between the rpm of the spindle, the force exerted on the spindle by the V-belt and the idle power of a wood-working drill was studied experimentally.
通过木工钻床主轴转数及木工钻床三角皮带压轴力等对钻床空载功率影响的实验研究,分析出了钻床空载功率的理论计算依据,为木工机床设计提供了参考。
10)  no-load loss
空载损耗
1.
Reducing no-load loss of transformer iron core on locomotive;
降低机车变压器铁心空载损耗的探讨
2.
Effects of adopting transformer electrical steel and HIB steel on no-load loss and noise level of transformer are analyzed.
阐述变压器电工钢、HIB钢对变压器空载损耗与噪声水平的影响,并对2005年和2010年的取向硅钢消耗量进行了预测。
3.
The distribution of magnetic flux density in the iron core was studied by applying a voltage,voltage waveform and frequency change while the no-load loss of transformer was being measured,and the factors having effect on the measurement of no-load loss of transformer were theoretically analysed in detail.
对测量变压器空载损耗从施加电压的方式、电压波形、频率变化三个方面,研究了铁心中磁通密度的分布情况;并在理论上详尽地分析了影响变压器空载损耗测量的因素。
补充资料:空载
见“负荷③”(285页)。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条