1) mixing cup temparetur
混合平均温度
2) average daily sol-air temperature
日平均综合温度
3) average temperature
平均温度
1.
Study of Application in Crude Oil Average Temperature in Oil Tank Based on Soft-instrumentation Techniques;
软测量技术在储油罐原油平均温度测量中的应用研究
2.
Equivalent-trapezoid method of average temperature calculation for multi-row-pipe straight frozen soil wall
多排管直线冻土墙平均温度的等效梯形计算方法
3.
The thickness,the average temperature and the frozen time are obtained from FEA.
利用 ANSYS大型有限元计算程序,得出了冻结壁厚度、冻结壁平均温度、冻结时间等参数,为冻结井的施工提供了必要的依据。
4) mean temperature
平均温度
1.
Then,the transition relation between the surface temperature and mean temperature is provided to r.
针对不同的温度分布形式,推出相应的平均温度与表面温度间的转换关系。
2.
Based on the characteristics of temperature field inside frozen walls , a detailed discussion is made on the relationship between the temperature of the side wall and the mean temperature of the frozen walls ,and the effective thickness and bearing capacity.
本文根据冻结壁温度场的特征,详细地分析了井帮温度与冻结壁的平均温度、有效厚度及其承载力等方面的关系。
3.
Analyses the unreasonability of hydraulic calculation based on the mean temperature 60 ℃ in a heating system with 95 ℃/70 ℃ hot water.
分析研究了95℃/70℃热水供暖系统按平均温度60℃进行管路水力计算的不合理性。
5) mixing temperature
混合温度
1.
The mixing temperature of the flow is gained from the heat balance equation.
通过建立热平衡方程,求出流体混合温度。
6) temperature mixing
温度混合
1.
5 analogical simulating test module shows that the coolant channel and the hot gas duct of the HTR-10 can yield a non-dimensional coolant temperature mixing degree (Mr) of more than 98% and a temperature homogeneous degree of over 99%.
７４６情况下，堆底流道结构能使冷却剂的温度混合程度和均匀程度分别达９４％和９８。
补充资料：算术平均温度差
分子式：
CAS号：
性质：在并流或逆流的换热器中，两种流体在换热器两端温差的算术平均值，△t1、△t2分别为两端温差。在换热器计算中，当△t1/△t2<2时，可用算术平均温度差代替对数平均温度差，以简化计算过程。
CAS号：
性质：在并流或逆流的换热器中，两种流体在换热器两端温差的算术平均值，△t1、△t2分别为两端温差。在换热器计算中，当△t1/△t2<2时，可用算术平均温度差代替对数平均温度差，以简化计算过程。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条