1) contact ionization
接触电离
2) contact glow discharge electrolysis plasma
接触辉光放电等离子体
1.
Graft polymerization of acrylic acid on starch was carried out via contact glow discharge electrolysis plasma(CGDE),and the product was characterized by Fourier transform infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and scanning electron microscopy(SEM).
采用接触辉光放电等离子体代替常规化学引发剂引发聚合反应成功地合成了淀粉接枝丙烯酸超强吸水树脂,用傅立叶变换红外光谱(FTIR)、热重分析(TGA)和扫描电子显微镜(SEM)测试技术对该吸水性树脂进行了结构表征和性能测试。
3) contact resistance
接触电阻
1.
Stable distribution analysis to statistical evaluation of contact resistance in aluminum alloy spot welding;
基于稳定分布的铝合金点焊接触电阻
2.
On the contact resistance between graphite/polypropylene composite plate and carbon paper;
石墨／聚丙烯复合板与碳纸间的接触电阻
3.
Study of prediction method for contact resistance based on experiment constitutive relation;
基于实验本构关系的接触电阻预测方法研究
4) electrical contact
电接触
1.
Application of electroplated silver alloy/nanoparticle composites to electrical contact of high-voltage switch
纳米粉体复合镀银合金在高压开关电接触部位上的应用
2.
So far, fretting induced failures in electrical contact is an important subject, but has not been paid much attention in experimental investigations.
以AgCu10合金为对象 ,研究和探讨了离子注入提高电接触材料的抗氧化和抗磨损性能并改善电接触微动磨损的技术。
3.
Based on the developmental procedure of electrical contact theory,several popular problems on electrical contact theory at home and abroad is analyzed according to the situation of coal production in this paper.
根据电接触理论的发展过程，并结合煤矿生产现状对目前国内外电接触可靠性研究中的几个热点问题进行了分析。
5) electric contact
电接触
1.
Studies on electric contact silver based composite deposit intensified with nano crystal diamond particles;
纳米晶金刚石织构粒子增强银基电接触复合镀层的研究
2.
Study on the electric contact and surface film of electric machines;
电机的电接触及表面膜研究
3.
Analysis of cathode voltage drop in aluminum electrolysis cells with an electric contact model;
采用电接触模型的铝电解槽阴极电压降分析
6) interfacial contact resistance
接触电阻
1.
The electrochemical methods were investigated in a simulated PEMFC environment and the volt-ampere technique was applied to measure interfacial contact resistance between the sample and carbon paper.
以304不锈钢为研究对象,采用电化学方法测定其在模拟PEMFC环境下的极化曲线和对应于PEMFC工作电位下的恒电流极化曲线,用伏安法测量304不锈钢表面氧化膜/钝化膜与碳纸之间的接触电阻。
2.
The 304 stainless steel treated by electroplating Cr and plasma-assisted nitriding processes was investigated by electrochemical methods in the simulated PEMFC environments, and interfacial contact resistance between the samp.
测定了经过镀铬后再离子氮化的304不锈钢在模拟PEMFC环境下的电化学性能,测量了氮化层与碳纸之间的接触电阻。
3.
The interfacial contact resistance between the sample and carbon paper are measured with volt-ampere technique.
以304不锈钢做为研究对象,测定了其在模拟PEMFC环境下的极化曲线,极化时间分别为4 h和10 h的交流阻抗谱,用伏安法测量了304不锈钢表面氧化膜/钝化膜与碳纸之间的接触电阻。
补充资料：接触
接触
contact
接触(c。ntact)个人或团体之间初步发生的交往行为。接触不仅是信息交换过程，还是人际关系建立的手段。接触分直接接触和间接接触。直接接触是人们进行面对面的接触，是人际交往的开端，多在直接群体中进行，如家庭、车间、班级等发生的接触。人们之间的好感、友谊、爱情、合作等关系多是从直接接触开始的。当然直接接触也可能导致反感、拥挤和争吵。间接接触是借助各种工具和技术手段进行的交往，如以文字、书报、互联网、电讯、电影、电视为媒介所发生的接触。这种接触虽有其长处，但也有局限性，心理障碍较大，易有隔阂感。无论哪种接触都是人与人之间进行心理交换的过程，都会对人的态度与行为发生影响。 (孙俊山撰张觉审)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条