1) subjective organization
主观组织主观组织
2) Subjective Fit Perceptions
个体-组织主观匹配
3) microstructure
[英]['maikrəu,strʌktʃə] [美]['maɪkro,strʌktʃɚ]
微观组织
1.
Acicular ferrite microstructure of weld metal for low-alloy steel;
低合金钢焊缝的针状铁素体微观组织
2.
Effects of Ce and Sn on Microstructure of AZ91 Magnesium Alloy;
Ce、Sn对AZ91合金微观组织的影响
3.
Preorm optimal design and experimental study on the microstructure in forging process;
面向微观组织优化的锻造工艺预成形优化设计及实验研究
4) Microstructures
微观组织
1.
Effect of strain rate on flow stresses and microstructures of titanium alloy TC11 alloy;
应变速率对TC11钛合金流动应力和微观组织的影响
2.
Effects of minor manganese addition on microstructures and tensile properties of Al-Mg-Si alloys;
微量Mn对Al-Mg-Si合金微观组织与拉伸性能的影响
3.
Mechanical properties,microstructures and fracture appearance of the sand-cast samples of ZL210A alloy solution-treated at 545 ℃ and 555 ℃ respectively were analyzed.
通过对ZL210A合金砂型试样进行545℃固溶和555℃固溶处理,分析不同固溶温度处理试样的力学性能、微观组织和断口形貌,探讨了不同固溶温度对合金砂型试样性能和组织的影响。
5) micro structure
微观组织
1.
The tests on the micro structure and mechanical performance of Incoloy 800H alloy which has been in high-temperature and high-pressure environment service of H_2-presence for 100,000 hours and comparison of the test results with characteristics of hydrogen induced cracking of austenitic steel ha.
文章通过试验研究了高温高压临氢环境下、服役约100 kh的Incoloy 800H合金钢的微观组织和力学性能,并将试验结果与氢致奥氏体不锈钢损伤典型特征比较,发现长期服役在高温高压临氢工况下,氢致Incoloy 800H力学性能下降和微观组织损伤轻微,即Incoloy 800H合金钢抗氢损伤性能优良。
2.
The influence to micro structure of laser cladding layer by laser cladding craft parameters is studied, and the micro hardness of laser cladding layer and substrate is tested.
研究了工艺参数对激光熔覆层微观组织的影响,测试了熔覆层和基材的显微硬度,获得了无裂纹、孔洞等缺陷的熔覆层。
6) macrostructure
[,mækrəu'strʌktʃə]
宏观组织
1.
Effect of Pulse Electric Current on the Macrostructure of Al and Al-5.3% Zn Alloy;
脉冲电流对Al及Al-5.3%Zn合金宏观组织的影响
2.
The effects of technological parameters on the macrostructure are studied by orthogonal experiment in order to know about the process of cold crucible directional solid.
用电磁冷坩埚进行定向凝固可以将电磁冷坩埚和定向凝固技术的优点相结合,为难熔、活泼金属的定向凝固开辟新的方法,但工艺过程复杂,影响因素众多,为了解冷坩埚定向凝固过程和宏观组织演变规律,本实验通过正交实验得到了工艺参数对宏观组织的影响规律,研究发现抽拉速度是影响宏观组织最主要的因素,其他因素影响不显著,随抽拉速度降低,晶粒数量明显减少,当抽拉速度为1mm/min时,能获得定向凝固组织。
3.
The macrostructure and solute distribution in the cross-section of ingot of magnesium alloy AZ31 by electromagnetically continuous casting (EMC) were studied.
对电磁连铸AZ31镁合金的宏观组织,以及溶质元素在铸锭截面上的分布规律进行了工业化(生产)规模的实验研究。
补充资料：个体匹配
个体匹配
以病例和对照的个体为单位进行匹配叫个体匹配。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条