1)  heat-insulating block
隔热块
2)  insulator pellet
隔热块
3)  Insulating block of foamed plastics
泡沫塑料隔热块
4)  heat insulation
隔热
1.
Developments and application of heat insulation fire retardant coating(non-bulging) special for steel structure;
钢材构件专用隔热防火涂料(非膨胀型)的研制
2.
In room under air conditioning conditionXiaogan building roof,wall heat insulationenergy conservation target selection;
室内空调条件下孝感市建筑物屋顶、墙体的隔热节能指标的选取
5)  heat-insulation
隔热
1.
The obtained emulsin coating shows good elasticity, soil-proofing property, heat-insulation, solar-reflection and et al.
选用核-壳结构丙烯酸乳液为基料,以金红石型钛白粉为颜料、空心玻璃微珠和具有红外辐射功能的矿粉为填料,引入纳米SiO2进行改性,通过控制PVC和选用适宜的助剂等方法,配制的乳胶漆其涂膜兼具了弹性、耐沾污性、热反射性、隔热性等多种功能。
6)  thermal insulation
隔热
1.
Increasing thermal insulation level of building,making an improvement thermal environment of residence;
提高建筑物隔热水平 改善居住热环境
2.
According to the elements of coatings reflecting the solar radiation,a kind of solar heat reflection coating with good thermal insulation was prepared using polyacrylate resin as basic material,rutile type titanium pigment,talc and hollow glass microspheres as color filler.
根据涂料反射太阳热的原理,以丙烯酸树脂为基料,以金红石型钛白粉、云母粉及空心玻璃微珠为原料,制备了隔热性能和耐候性能均良好的太阳热反射隔热涂料,并研究了颜料、填料种类、粒径、涂层厚度对涂料隔热性能的影响。
3.
The influence of some technological factors on thermal insulation and sound-absorbing properties of foam glasses was briefly analyzed.
回顾了泡沫玻璃研究的过程,分析了影响泡沫玻璃隔热和吸声性能的因素,指出了泡沫玻璃制造工艺上存在的问题和解决方法,探讨了泡沫玻璃的发展方向。
7)  Insulation
隔热
1.
Insulation Mechanism of Composite at Long Time Aeroheating Conditions;
复合材料在长时间加热条件下的隔热机理
2.
To get more accurate and efficient solution, a computer program based on economical thickness method is developed with functions of thermal insulation, cooling insulation and dew point check, etc.
设备和管道的隔热计算十分繁琐和复杂，为提高计算效率和计算的准确性，采用经济厚度计算法，编制了一种具有保温、保冷和露点温度校核等多功能的设备和管道隔热计算程序。
3.
With measurements and calculation, discusses the insulating effects of Boston ivy covering the external walls of buildings, and demonstrates that vegetation is an active and effective means for building insulation, resulting in benign output in energy efficiency and ecological preservation.
通过实测和计算 ,从室内外环境两方面分析了外墙覆盖攀缘植物地锦的建筑物隔热节能情况 ,论证了绿化是一种有效、主动的隔热节能方式 ,具有良好的节能和生态效应。
8)  thermal shield
隔热
9)  thermal insulation coatings
隔热涂料
1.
Study on the External Wall Thermal Insulation Coatings;
建筑外墙隔热涂料的研究
2.
In this paper,the aluminum silicate thermal insulation coatings was modified with pigments and fillers,such as hollow glass microspheres and TiO2.
用空心玻璃珠和二氧化钛等颜填料改性硅酸铝隔热涂料,讨论了颜填料的用量、颜填料的性能如遮盖力、颜色、晶型对隔热涂料反射率的影响,确定了最佳颜填料配比,分析了影响隔热涂料热反射率的因素。
3.
This paper introduces the testing method and heat-insulating principle of the building external wall thermal insulation coatings.
在现代社会对环境要求越来越高的情况下,保温隔热涂料的研究势在必行。
10)  heat insulation
隔热性能
1.
A new resin for corrosion protective and fire resistant and heat insulation dual functional coatings has been developed.
研制了具有优异的防火隔热性能和防腐性能的双功能钢结构防火涂料用防腐树脂。
补充资料：半硬质聚氨酯泡沫塑料
分子式：
CAS号：

性质：是开孔率在90%以上的泡沫，交联密度远高于软质泡沫，但次于硬质泡沫，密度较高，刚性较大。能承受较高的压缩负荷，并能慢慢完全恢复，具有减震和吸能性能。通常采用模塑成型，大多数是在乙烯基或其他塑料表皮层内直接模塑发泡。只用在汽车工业和制造仪表板、保险杠、地板垫材等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条