1) autoignition characteristic
自动点火特性
2) ignition characteristics
点火特性
1.
Effect of primary air velocity and pulverized coal concentration on the ignition characteristics of the first stage chamber for plasma burner;
一次风速度和煤粉质量浓度对等离子燃烧器一级燃烧筒点火特性的影响
2.
And the factors including air flowrate, atomizing air pressure, oil flowrate, viscosity of oil, and temperature in the furnace, which influence the ignition characteristics of an air swirl atomizing spray nozzle were discussed.
进行了点火试验研究,探讨了助燃风量、雾化气压力、喷油量、燃油粘度及炉膛温度等因素对气动旋流喷嘴点火特性的影响。
3.
Many tests have been done to determine the ignition characteristics of minute solid rocket motor.
设计了一种适用于某微小型固体火箭发动机的点火器 ,对某微小型固体火箭发动机的点火特性进行了大量试验研究 ,引入了初始点火压强的概念 ,找出了影响点火延迟时间散布的主要规律 ,确定了能满足微小型固体火箭发动机点火性能的点火方
3) ignition characteristic
点火特性
1.
Using the available data from 3 starts in simulated altitude tests,the windmilling start ignition characteristic of a turbofan engine was analyzed in this paper.
发动机点火特性是其在极限高度与极限边界成功起动的重要影响因素。
4) Automatic ignition
自动点火
1.
In order to overcome shortcomings,an automatic ignition system based on PLC,GKCT128-0 is developed,which consists of five parts,that are logic control,display operation,dynamical drive,flame detection and controlled objects.
GKCT1258-0即是为了克服这些缺陷而设计的基于PLC的自动点火系统。
2.
The paper adopts energy saving technique of optimization operating control system in boiler automatic ignition,which reduced energy-consuming,and ensured safety in production.
本文采用锅炉自动点火优化运行控制系统的节能技术 ,大大降低了能耗、节约了能源 ,保证了安全生
5) autoignition
[,ɔ:təuiɡ'niʃən]
自动点火
1.
A new type spirit stove trough and autoignition device was designed by application of four-bar linkage,which solved the problem that people would be possibly scalded by the soup from the cauldron when the cauldron was picked up.
应用四杆机构设计了一种新型的酒精炉料槽及自动点火装置,解决了传统酒精炉加料时需要将锅端起,容易烫伤人的问题。
6) autogenous ignition temperature
自动着火点
补充资料:催化点火
分子式:
CAS号:
性质:在催化反应器中,利用电热丝加热以点燃催化剂层,称为催化点火。如在乙醇氧化制乙醛时,为使电解银催化剂升温至550~630℃开始反应所进行的点火处理。点火圈安装在催化剂上表面约3~5cm处,点火时,电热丝因通电发红,进入反应器的原料气在电热丝上不完全燃烧产生蓝色火苗,逐渐使催化剂均匀受热,加热到一定温度后,原料气直接在催化剂上反应,此时可切断电热丝电源,催化层已被点燃。
CAS号:
性质:在催化反应器中,利用电热丝加热以点燃催化剂层,称为催化点火。如在乙醇氧化制乙醛时,为使电解银催化剂升温至550~630℃开始反应所进行的点火处理。点火圈安装在催化剂上表面约3~5cm处,点火时,电热丝因通电发红,进入反应器的原料气在电热丝上不完全燃烧产生蓝色火苗,逐渐使催化剂均匀受热,加热到一定温度后,原料气直接在催化剂上反应,此时可切断电热丝电源,催化层已被点燃。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条