1) rear rear axle
后-后桥
2) rear axle
后桥
1.
Analysis and control of the scream noise caused by the rear axle of a minicar;
后桥尖啸声原因分析及控制
2.
The rear axle is one of the key components for automobiles,which suffers from complex forces;welding is the critical process for the rear axle manufacturing;so the welding quality of the rear axle guaranteed plays a greatly important role here.
后桥是汽车的关键部件之一,受力复杂;焊接是车桥生产的关键工艺;因此,保证后桥的焊接质量十分重要。
3.
In this article,the welding temperature field on the rear axle housing is simulated by finite element method.
对汽车后桥壳体进行焊接温度场有限元分析和模拟,建立有限元方程,利用APDL语言编制了相应的程序,在程序中考虑了材料热物性参数的温度相关性、熔化潜热以及对流等对温度场的影响。
3) rear bridge
后桥
1.
The installed angle of the rear bridge determines whether the driveline is Z or W arrangement which affects the angular velocity fluctuation in driveline differently during vehicle vibration.
研究了采用“A”型架的车辆在振动过程中传动系统万向节安装角度的变化情况,及其引起的传动系统转速波动,传动系统的布置型式可以是Z型或W型,比较了不同的布置型式对传动系统转速波动的影响,后桥振动过程中传动轴转过的角度小于“A”型架转过的角度时,采用W型布置产生的速度波动要优于Z型布置,给出了Z型和W型布置的传动系统中后桥安装角度的求解方法,以及对于特定的采用“A”型架的车型传动系统采用Z型还是W型布置的判断方法。
2.
The vibration feature of the rear bridge was analyzed and measure position was ascertained according to the actual operating mode and the surveying result.
汽车后桥是汽车的关键部件之 ,据统计,有20%的事故是由于后桥造成的,所以后桥在出厂前要进行严格的质量检验。
4) rear axle bridges
后桥桥架
5) rear axle housing
后桥壳
1.
Finite Element Analysis on the Rear Axle Housing of Vehicle;
某型汽车后桥壳的有限元分析
2.
Producing Motor Rear Axle Housing with as cast Ferrite Nodular Iron Which is Melted in Cupola Furnace;
冲天炉熔炼生产铸态球铁汽车后桥壳
3.
Elephant skin defect is easy occur on ductile iron rear axle housing castings.
球墨铸铁汽车后桥壳铸件在生产过程中容易产生皱皮缺陷,为查明原因,采用View Cast软件对其铸造工艺进行分析,并对充型及凝固过程进行了模拟。
6) semi-shell of the rear bridge
后桥半壳
补充资料：高架道路桥
用桥式结构代替路堤的高架道路。在房屋密集、交通繁忙的城市中，可提高车速、节省用地、减少拆迁工程。比高架铁路、地下铁道的造价低，工期短而功能大，且可沿线开发新兴带状城镇，经济效益高。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条