1) monomer reactivity
单体活性
2) reactive monomer
活性单体
1.
Photoinitiator and reactive monomer were introduced and lastly the development directions of UV technology were viewed in this paper.
介绍了光引发剂及活性单体的研究进展,最后对光固化技术的发展趋势进行了展望。
2.
The results showed that the heat resistance was increased with the monomer functionality increasing as adding reactive monomer into the resin.
结果表明,在树脂中添加活性单体时,随单体官能度的增加,固化膜的耐热性能增加,但双官能团单体的用量对固化膜的耐热性能没有明显影响。
3) active monomer
活性单体
1.
In the paper,the reactivity of self-made benzoxazine(FBZ) and FBZ/E was studied by active monomer E.
通过加入活性单体E,对自制苯并口恶嗪(FBZ)及FBZ/E的反应性进行了研究,并制作了FBZ层压板和FBZ/E层压板,研究了其力学性能、阻燃性及热稳定性。
2.
The curing mechanism of UV curing coating is reviewed in this article as well as the development of photoinitiator,active monomer,oligomer and additive used in UV curing coating.
本文介绍了紫外光固化涂料的固化原理,同时也对紫外光固化涂料中的光引发剂、活性单体、齐聚物、助剂等的发展现状进行了综述,重点介绍了混杂齐聚物、水性齐聚物、超支化齐聚物的研究进展。
3.
Methods Active monomer DD with different consistency was added to PMMA.
方法用不同浓度的活性单体二甲基丙烯酸一缩乙二醇酯(DD)与MMA接枝共聚。
4) active amine monomer
活性胺单体
1.
The action of active amine monomer suppressing oxygen inhibition for UV-curing coatings is studied.
本文研究了活性胺单体对紫外光固化涂料氧阻聚效应的抑制作用，结果表明：抑制作用是由于胺类分子中具有活性α－Ｈ，胺类分子结构中供电子取代基对α－Ｈ有致钝作用，吸电子取代基能使α－Ｈ致活；同时，胺类分子迁移至表面的能力对抑制氧阻聚效应作用有显著影响。
5) monomer reactivity ratio,monomeric reactivity ratio
单体活性比
6) surface-active monomer
表面活性单体
1.
The Homopolymer of a cationic surface-active monomer,(2-acrylamido)ethyl tetradecyl dimethylammonium bromide(AMC14AB),was prepared through aqueous solution polymerization,and the homopolymer P(AMC14AB) was obtained.
采用水溶液均聚合方法,制备了阳离子型表面活性单体(2-丙烯酰胺基)乙基十四烷基二甲基溴化铵(AMC14AB)的均聚物,使用荧光探针法、表面张力测定及电导测定法,重点考察了均聚物P(AMC14AB)在水溶液中的胶束化行为与表面吸附现象。
2.
Soapless latex with interpenetrating network structure (LIPN) is prepared by two-step polymerization with surface-active monomers; the influence of latex particle size and distribution, stor- age stability, water-resistance, use level of cross-linking agent and compatibility of the compositio ns on dynamic force property is discussed.
采用表面活性单体,利用分步聚合法合成了无皂互穿网络聚合物乳液(LIPN),考察了乳液粒子大小及分布、储存稳定性、耐水性、交联剂用量、组分相容性对动态力学等性能的影响。
3.
A novel cationic and acrylamide-type surface-active monomer,dimethyltetradecyl(2-acrylamidopropyl) ammoniumbromide(DTAB),was successfully synthesized,and cationic DTAB-co-acrylamide(AM) copolymer p(DTAB-co-AM)with hydrophobically associative property was prepared by free radical homogeneous copolymerization of DTAB and AM in aqueous solution,which had both ionic and hydrophobic groups.
合成了新型的表面活性单体二甲基十四烷基(2-丙烯酰胺基丙基)溴化铵(DTAB),并将该单体与丙烯酰胺在水溶液中自由基均相共聚得到了兼具离子基团和疏水基团的阳离子疏水缔合丙烯酰胺共聚物p(DTAB-co-AM)。
补充资料：活性单体
分子式：
CAS号：
性质：又称活性单体。指具备反应能力的单体。单体在热、光等辐射能的作用下吸收能量处于激发态，或在引发剂作用下，与初级自由基发生加成反应形成链增长自由基，都称为活化单体。活化单体(或称活化分子)与单体相遇，反应立即开始。
CAS号：
性质：又称活性单体。指具备反应能力的单体。单体在热、光等辐射能的作用下吸收能量处于激发态，或在引发剂作用下，与初级自由基发生加成反应形成链增长自由基，都称为活化单体。活化单体(或称活化分子)与单体相遇，反应立即开始。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条