1) fenetre
['fenitə]
![点击朗读](/dictall/images/read.gif)
蚀穿掩冲体
2) erosion perforation
![点击朗读](/dictall/images/read.gif)
冲蚀穿孔
3) overthrust mass
![点击朗读](/dictall/images/read.gif)
掩冲体
4) thrust plate
![点击朗读](/dictall/images/read.gif)
冲掩体
5) slurry erosion
![点击朗读](/dictall/images/read.gif)
浆体冲蚀
1.
Study of slurry erosion resistance of Cu-base and Ni-base flame spray welding coating;
![点击朗读](/dictall/images/read.gif)
Cu基、Ni基喷焊层材料的浆体冲蚀性能研究
2.
The slurry erosion and cavitation erosion resistance of the coatings have been investigated.
用氧乙炔焰喷焊法制备了NiCrSiB及其加入WC陶瓷颗粒的复合覆层材料,用光学显微镜分析了覆层的显微组织,并对覆层材料的浆体冲蚀和气蚀抗力进行了研究,用扫描电子显微镜对覆层表面气蚀破坏形貌进行了观察。
3.
The slurry erosion resistance of the test coatings has been investigated.
![点击朗读](/dictall/images/read.gif)
采用氧乙炔焰喷焊法制备 Ni基覆层材料及其加入 WC陶瓷颗粒的复合覆层材料 ,用光学显微镜分析覆层材料的金相组织 ,对覆层材料的浆体冲蚀抗力进行对比研究。
6) erosion volume
![点击朗读](/dictall/images/read.gif)
冲蚀体积
1.
The experimental results show that the jet pressure rises and the rock erosion volume at unit horsepower increases rapidly when the jet pressure is lower than 150 MPa; but when the jet pressure reaches 150 MPa, it continues to rise and the rock erosion volume at unit horsepower decreases slightly.
实验结果表明,在射流压力低于150MPa时,随着射流压力升高,单位功率下的岩石冲蚀体积迅速增大,但当射流压力达到150MPa并进一步升高时,单位功率下的岩石冲蚀体积略有下降,150MPa时破岩效率最高;超高压喷嘴按前进的方式移动,破岩效果最佳;喷嘴移动速度小于2。
补充资料:成都无缝钢管厂管坯在菌式穿孔机上穿孔
成都无缝钢管厂管坯在菌式穿孔机上穿孔
成都无缝钢管厂管坯在菌式穿孔机上穿孔
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条