1) crystallographic axial ratio
结晶轴率
2) equiaxed crystal ratio
等轴晶率
1.
Using layer-by-layer shave steel scrap, the effect of electromagnetic stirring frequency parameter at secondary cooling area on the central segregation and equiaxed crystal ratio of a 1 450 mm×230 mm slab was investigated by chemical analysis and macrostructure.
通过对板坯逐层刨钢屑,采用化学分析和低倍组织检验的方法,研究了板坯连铸机二冷区电磁搅拌频率参数对1450mm×230mm板坯中心偏析和等轴晶率的影响。
2.
2 billet caster,the modified result shows that central segregation,equiaxed crystal ratio and billet internal quality are markedly improved by adopting appropriate nozzle model,layout and adequate water control.
凌钢通过对2号方坯连铸机二冷制度的优化结果表明,采用合理的喷嘴型号和布置以及适当的水量控制等制度,对减轻铸坯中心偏析、扩大铸坯等轴晶率、提高铸坯内部质量有明显效果,铸坯合格率由优化前的87。
3) crystallographic axes
结晶学轴
1.
The orientation relationship between the crystallographic axes ( a,b,c ) and optical indicatrix axes ( X,Y,Z ) has been discussed and the relevant experiments have been made to verify the results of the orientation.
本文报道了一种稀土硼酸盐晶体 ,CaLa2 B10 O19(LCB) ,晶体生长及折射率的测量 ,确定了其结晶学轴 (a ,b ,c)与物理学轴 (X ,Y ,Z)之间的夹角关系。
4) crystal axis
结晶轴
5) crystallographic axial angle
结晶轴角
6) crystallization rate
结晶速率
1.
The results show that nonisotheramal crystallization results are successfully analyzed by Mo Zhishen theory,and the crystallization rate of mLLDPE is slo- wer than that of traditional LLDPE at the same relative crystallinity.
结果表明,采用莫志深法处理数据可得到较好的线性关系,且mLLDPE在相同的相对结晶度下的结晶速率低于LLDPE。
2.
A kind of PET/GF composite with good mechanical properties and rapid crystallization rate was prepared.
制备了结晶速率快、力学性能优异的玻纤增强聚对苯二甲酸乙二酯(PET/GF)。
3.
The crystallization rate and the relative crystallization degree of PP/Talc composites is higher than those of pure PP, which causes the change of growing way for crystal nucleus and is advantageous to the processing and properties for PP/Talc composites.
用差示扫描量热法(DSC)研究聚丙烯(PP)及PP/Talc复合材料的非等温结晶过程,加入滑石粉后,PP/Talc的结晶速率、结晶度得到明显提高。
补充资料：等轴晶系
分子式：
分子量：
CAS号：
性质：又称立方晶系。属高级晶系。轴长：a=b=c。轴角：α=β=γ=90°。例如食盐和金刚石。
分子量：
CAS号：
性质：又称立方晶系。属高级晶系。轴长：a=b=c。轴角：α=β=γ=90°。例如食盐和金刚石。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条