1) grinding flat plate
研磨平板
2) lapping surface plate
研磨平板
3) burgee
研磨(平板玻璃的)废砂
4) shoe,nog plate
马蹄铁形磨盘(用来研磨平板玻璃)
5) grinding
研磨
1.
Fractal model for particle-size distribution of coal grinding;
基于分形方法的煤炭研磨颗粒粒度分布模型
2.
Preparation of γ-Fe_2O_3 Nanoparticles by Solid(wet)-phase Grinding;
γ-Fe_2O_3纳米粒子的(湿)固相研磨法制备研究
3.
The grinding materials and technology for stainless steel;
不锈钢研磨材料及研磨工艺
6) Lapping
研磨
1.
Rapid detection of subsurface damage of optical materials in lapping process and its influence regularity;
光学材料研磨亚表面损伤的快速检测及其影响规律
2.
Research on high speed lapping paraboloid workpiece based on bending and forming method;
基于弯曲成形法抛物面高速研磨的研究
3.
Research on the Lapping Uniformity of Uncertain Eccentricity Plane Lapping;
不定偏心平面研磨均匀性的研究
7) polishing
研磨
1.
Polishing Robot System and the Control of Its Motion;
研磨机器人系统及其运动控制
2.
A new way of polishing is discussed, in which the ultrasonic energy is applied to the interface of mechanical polishing and correlative equipment and experimental equipment are designed.
为了提高光纤连接器端面的加工效率和加工质量,改善连接器光传输性能,探讨了在机械研磨的界面上引入超声能的复合研磨方式,设计了相应的超声机械研磨装置。
3.
To improve the material removal rate(MRR),this paper discussed a new ultrasonic polishing in which the ultrasonic energy was introduced to the interface of common polishing,and compared this new polishing process with the common polishing process in the MRR.
为了提高机械研磨的材料去除率,探讨了在机械研磨的界面上引入超声能的复合研磨方式,将机械研磨和引入超声的复合研磨两种方法的去除效率进行了实验对比;发现复合研磨后,去除效率有显著提高;得出超声/机械复合研磨的加工效率明显优于机械研磨。
8) grind
研磨
1.
Siemens S7-300 PIc In Paper making Grinding Production Line Application;
西门子S7-300 PLC在造纸研磨生产线中的应用
2.
The applications of the different grinding media in the grind of ink were summarized in this pa- per.
介绍不同的研磨介质在油墨中的应用,并讨论了研磨介质的种类,体积比及尺寸对基料细度的影响。
3.
The grind renovation processes of rough grind,fine grind and polishing are analyzed.
介绍拉丝模模坯、模套的加工及模芯装镶过程中应注意的要点 ;给出拉丝模修复常用研磨剂的特性和应用范围 ,比较了几种研磨剂研磨效率 ;分析粗磨、细磨和精磨、抛光的研磨修复工
9) rubbing
研磨
1.
Finishing treatment of plating deposit and conversion coating—drawing, rubbing and double-color treatment;
镀层及转化膜的精饰处理──拉丝、研磨及双色处理
2.
In order to improve machining precision and rubbing efficiency of HIPSN( Hot - Isostatic Pressed Silicon Nitride) ceramic ball and to reduce its rubbing cost, a new rubbing method of ceramic ball, called Taper Rubbing, was developed.
为了提高热等静压氮化硅(HIPSN)陶瓷球的研磨效率和精度,降低其研磨成本,本文设计和研制了一种新的陶瓷球研磨方法--锥形研磨法;探讨了该方法下陶瓷球表面研磨迹线的分布规律。
3.
This paper introduces the progress of MRF rubbing technology, its principle of application and key technique.
介绍了磁流变研磨技术的发展、应用原理及关键技术,讨论了磁流变抛光液的制备及其性能对磁流变研磨工艺的影响。
10) grind
(研)磨
补充资料：电动平板摆动式砂光机
电动平板摆动式砂光机
electric orbital type sander
dlandong Pingban bo一dongsh(shaguang一电动平板摆动式砂光机(electri。orbitalsander)用砂布、砂纸对各种材料的工件表行砂磨、光整加工用的电动工具.电动平板摆动式机用于建筑装演、室内装修、家具制造等场所对才件进行精磨、砂光、打蜡上光;内外墙面的砂平、作业.也能用于除锈、打光腻子等。它既能用作平光，也能砂光略带弧形的曲面。按选用电动机的三有单相申励式(约175W)和单相异步电容式(乡W)两种。 电动平板摆动式砂光机由电动机、摆动机构平板等组成。摆动机构由电动机的旋转运动带裁轴，并驱动装有砂纸或砂布的摆动平板作轨道困(见图)，从而对作业面进行砂光。为克服偏心轴质Pe进光构光砂瞥80y瓦沙洁盯面通一1动心动产髻扁罢隆) ┌──┐ │{ │ │‘曰│ └──┘ ┌─┐ ┌─┤习│ │12│ │ ├─┤ │ │鳖├─┘ └─┼─────────┐ │--，，娜娜户尹钾哪│ └─────────┘ 单相电容平板摆动式砂光机的结构 1一后端盖，2一风扇;3一外充;4一前手柄;5一海 垫;6一绝缘轴承座;7一偏心轴;8一铝合金平板娜 扇形平衡块;1。一像胶柱;11一砂布夹紧装里，12一 容界;13一手柄;14一电浑开关.15一电源线生的振动，在紧靠平板的转子轴上安装一扇形偏衡块。砂磨不同材质的工件时，选用不同磨料制成纸或砂布。操作时，加压要适当、均匀，否则会造具过载和损伤作业面。 见家用电动工具。 平砂工乙合均龙
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条