2) the top of flange
翼缘端部
1.
According to usage the top of flange surface minor faults proceed experiment and study, thought it do not affect HR H-beam.
通过对热轧H型钢翼缘端部表面瑕疵进行试验、研究 ,认为翼缘端部表面瑕疵不影响热轧H型钢的使用。
3) endwall fence
端壁翼刀
1.
The numerical simulation has been carried out on 3D viscous flowfield in CDA(controlled diffusion airfoils) compressor cascade with and without endwall fences on different streamwise locations and different geometrical parameters.
对CDA压气机直叶栅和具有不同流向位置和不同几何参数的端壁翼刀叶栅内三维粘性流场进行了数值模拟。
2.
An experimental investigation was conducted of a compressor cascade with endwall fences installed at different circumferential locations under different incidences.
对不同冲角下端壁翼刀安装在不同周向位置的压气机叶栅进行的实验研究,结果表明,叶栅总损失随翼刀位置的变化趋势是远离吸力面时损失降低,靠近吸力面时损失升高,冲角变化时叶栅总损失降低的最佳翼刀位置发生变化;在距离吸力面位置70%相对节距处安装翼刀后叶栅总损失在一定的冲角范围内(-9°~+6°)仍然比常规叶栅低。
3.
The affect of endwall fences at different locations on compressor cascade loss and secondary flow were investigated through detailed experimental investigation in a low speed wind tunnel.
在低速大尺寸叶栅风洞上通过详细测量叶栅流场,研究了叶栅端壁上不同周向位置处加装端壁翼刀对压气机叶栅损失和二次流的影响。
4) wingtip expansion
翼端间距
1.
The horizontal expansion of bottom otter trawl, especially the wingtip expansion, is one of the most important parameters affecting capture efficiency.
底层单拖网的翼端间距是影响拖网系统捕捞效率的重要技术参数。
5) boundary fluctuation
端点飞翼
6) wing-tip installation
翼端装置
补充资料：带式输送机端部破碎机
带式输送机端部破碎机
带式输送机端部破碎机象塑
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条