2) permanent mould
金属型
1.
Design of Permanent Mould for Aluminum Alloy Drill Housing of Guide-rail and Its Simulation;
导轨钻机铝合金壳体金属型设计与铸造模拟
2.
Design of Permanent Mould for Piston in MAZDA620;
MAZDA620活塞金属型设计
3.
As-cast Ferrite Ductile Iron Auto-Hub in Permanent Mould;
金属型生产铸态铁素体球铁汽车轮毂的研究
3) metal mould
金属型
1.
The non-equilibrium crystallizing processes of the metal mould nodular iron ball were investigated through analyzing the properties and microstructures of the nodular iron grinding ball.
通过分析不同成分球铁磨球零件性能和金相组织,对金属型磨球的非平衡凝固特性进行了较深入的研究。
2.
The casting process of water-cooled metal mould ductile iron crankshaft castings for compressor is presented,and the control range of process parameters is also discussed.
介绍空调压缩机球墨铸铁曲轴水冷金属型铸造工艺,提出了水冷金属型铸造工艺参数的控制范围,认为金属型生产过程中严格控制铁液质量和浇注工艺参数是减少铸造缺陷的有效措施。
3.
Taking the example of typical parts, the paper talks about the design plan of casting an aluminum alloy casting by metal mould casting, and also shows the bright prospect of application of metal mould casting in casting productio
本文以典型零件为例 ,探讨了用金属型铸造铝合金铸件的设计方案 ,说明了金属型铸造在铸件生产中广泛的应用前
4) Permanent Mold
金属型
1.
Technological Aspects in Design of Permanent Mold for Aluminum Piston in Casting Machine;
铝活塞金属型设计的工艺问题
2.
Research on Insulating Sleeve for Aluminium Alloy Piston by Permanent Mold;
金属型浇注铝活塞用保温冒口套的研制
3.
Analysis on inner defects in TiAl based alloy exhaust valve during the centrifugal foundry process in permanent mold;
TiAl基合金排气阀金属型离心铸造过程内部缺陷分析
5) copper metal mold
铜金属型
1.
This paper introduces the design methods of copper metal mold for producing iron castings based on UG(Unigraphics).
介绍了利用Unigraphics(简称UG)软件设计铜金属型模具的方法,并对铸件的充型凝固过程进行数值模拟及理论分析,进一步完善模具设计参数,从而确定模具设计方案。
6) metal mold
金属型
1.
Evolvement of microstructure of microcastings by microcasting based on metal mold;
金属型微铸造工艺成形微铸件的组织演变
2.
The effect of different casting methods of sand mold and metal mold on the mechanical properties and fracture surfaces of ZL210A casting aluminum alloy of casting,solid-solution and aging was investigated.
采用砂型和金属型两种不同铸造方法对铸态、固溶态和时效态ZL210A合金性能及断口形貌的影响进行研究。
3.
The metal mold casting processes including assembly metallic die design and manufacture were studied by an example of concrete vibrator's wiring bale.
复杂筒形铝合金铸件,其外形一般带有连接爪、凸台等结构,不利于铸件从金属型中脱模。
补充资料：可焊型金属防锈漆
分子式：
CAS号：
性质：指具有可焊性、不影响焊接质量且无毒性的金属防锈底漆。其中包括磷化底漆、常用油基树脂、醇酸和环氧酯为基料的铬酸盐防锈漆、用氧化铁及铝粉代替锌粉的环氧类无锌底漆等。
CAS号：
性质：指具有可焊性、不影响焊接质量且无毒性的金属防锈底漆。其中包括磷化底漆、常用油基树脂、醇酸和环氧酯为基料的铬酸盐防锈漆、用氧化铁及铝粉代替锌粉的环氧类无锌底漆等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条