说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> H字型钢
1)  H-bar
H字型钢
2)  H-beam
H型钢
1.
Analysis of causes of Abnormal Mechanical Properties of H-beam Web;
H型钢腹板力学性能异常原因分析
2.
3D Elastic-plastic Finite Element Analysis for X-H Rolling in H-beam;
H型钢X-H轧制法三维弹塑性仿真分析
3.
H-beam FEM Simulation in Hot-finishing-Rolling Process;
H型钢精轧过程有限元仿真(英文)
3)  H beam
H型钢
1.
Structural configuration of H beam mill horizontal roll shifting device;
H型钢轧机水平辊轴向移动装置结构形式
2.
Four pass cogging simulation of H beam by FEM;
H型钢开坯轧制四道次有限元模拟
3.
Discussion on mechanical properties of H beam by chemical composition of continuous casting abnormal billet;
根据连铸异型坯化学成分预报H型钢力学性能的探讨
4)  H-shaped steel
H型钢
1.
This article has introduced briefly the building of a new H-shaped steel factory of Changzhi Steel group Corporation,including room planning,technological process,major equipment,performance parameter,automatic control system and the design characteristics of the production line.
文章介绍了长治钢铁集团公司新建H型钢厂生产线的简况,包括平面布置、工艺流程、主要设备及性能参数、自动控制系统等情况以及生产线的设计特点。
2.
After analyzing the causes that result in those problems,some countermeasures and suggestions are provided to solve the existed problems in base-joint of H-shaped steel beam,grid frame and steel column footing.
通过工程实践及调查,提出了目前轻钢结构支座节点施工中存在的问题,分析了在节点设计、材料、施工等方面的原因,并针对H型钢钢架支座、网架支座、柱脚等节点存在的问题,提出了对策和建议。
3.
The paper introduces jet grouting piles with H-shaped steel composite piles in a project.
通过工程实例介绍了利用高压旋喷桩内插H型钢(复合旋喷桩)进行基坑止水围护的方法,简述了该工法的受力特点、施工效果、设计及施工要点,对于需要进行管线保护的复杂深基坑具有一定推广价值。
5)  H-shape steel billet
H型钢坯
6)  H-type steel
H型钢
1.
Application of plugged H-type steel in high pressure rotary jetting piles in timbering engineering;
高压旋喷桩内插H型钢在支护工程中的应用
2.
The H-Type Steel Supporting Structure of A SMW Method(SMW)applies its flexural rigidity to bear earth pressure,cement-soil mixing piles to seal water and control the flowing deformation of soft soils through separate mixing piles and H-type steel.
类SMW法的H型钢支护结构,将搅拌桩和H型钢分离,利用H型钢的抗弯刚度承受土压力,利用水泥土搅拌桩止水和阻挡软土的流变。
补充资料:H型钢
分子式:
CAS号:

性质: 又称宽缘工字钢。H型钢不同于工字钢,其腿内外侧平行,腿端呈直角,具有截面模数大、质量轻、节省金属等优点,不但可使建筑结构质量减轻30%~40%,而且便于拼装组合成各种构件,从而节约焊接、铆接工作量25%左右,常用于要求承载能力大、截面稳定性好的大型桥梁、高层建筑、重型设备、高速公路等方面。H型钢轧机有格雷式(Grey)和普泼式(Puppe)两类。最大的H型钢腰高达1200mm,腿宽530mm。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条